Thermal Laboratory Equipment Convection And Radiation 0,02mbar

WL 377 Convection and radiation

Description

Under real conditions, the heat transport between two objects is normally substance-bound, i.e. convection and/or heat conduction, and not substance-bound, i.e. radiation, at the same time. Determining the individual heat quantities of one type of transfer is difficult.

The WL 377 trainer enables users to match the individual heat quantities to the corresponding type of transfer. The core element is a heated metal cylinder located at the centre of the pressure vessel. The surface temperature of the heated metal cylinder is controlled. Temperature sensors measure the surface temperature of the metal cylinder and the wall temperature of the pressure vessel. In addition to the heating power of the metal cylinder, it is possible to study the heat transport from the metal cylinder to the wall of the pressure vessel.

The pressure vessel can be put under vacuum or positive gauge pressure. In the vacuum, heat is transported primarily by radiation. If the vessel is filled with gas and is under positive gauge pressure, heat is also transferred by convection. It is possible to compare the heat transfer in different gases. In addition to air, nitrogen, helium, carbon dioxide or other gases are also suitable.

Heat transport by conduction is largely suppressed by adequately suspending the metal cylinder.

A rotary vane pump generates negative pressures down to approx. 0,02mbar. Positive gauge pressures up to approx. 1bar can be realised with compressed air. Two pressure sensors with suitable measuring ranges are available for the pressure measurement: a Pirani sensor measures the negative pressure while a piezo-resistive sensor measures the positive pressure.

The measured values can be read on digital displays. At the same time, the measured values can also be transmitted directly to a PC via USB, where they can be analysed with the software.

Specification

heat transfer between heated metal cylinder and vessel wall by convection and radiation

operation with various gases possible

experiments in vacuum or at a slight positive gauge pressure

electrically heated metal cylinder in the pressure vessel as experimental vessel

temperature-controlled heating element

vacuum generation with rotary vane pump

instrumentation: 1 temperature sensor on the metal cylinder, 1 power sensor at the heating element, 1 Pirani pressure sensor, 1 piezo-resistive pressure sensor

digital displays for temperature, pressure and heating power

software for data acquisition via USB under Windows 8.1, 10

Technical data

Heating element

output: 20W

radiation surface area: approx. 61cm2

Pressure vessel

pressure: -1…1,5bar

volume: 11L

Pump for vacuum generation

power consumption: 250W

nominal suction capacity: 5m3/h

final pressure with gas ballast: 3*10-3mbar

final pressure without gas ballast: 3*10-3mbar

Measuring ranges

negative pressure: 0,5*10-3…1000mbar

pressure: -1…1,5bar rel.

temperature: 0…250°C

power: 0…23W

230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional

Dimensions and weight

LxWxH: 1340x790x1500mm
Weight: approx. 160kg

Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
 
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

 
 
Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

 
 
Certificate
Our products takes ISO9001 product management system.