|
[China]
Trade Verify
Address: NO.32 West Taihu Road, Xinbei District, Changzhou, Jiangsu
Contact name:Jane
Changzhou Victory Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Pure nickel wire with good mechanical properties over a wide range
of temperature and excellent resistance to many corrosives, in
particular hydroxides.
Good resistance to corrosion in acids and alkalis and is most
useful under reducing conditions. Outstanding resistance to caustic
alkalis up to and including the molten state. In acid, alkaline and
neutral salt solutions the material shows good resistance, but in
oxidizing salt solutions severe attack will occur. Resistant to all
dry gases at room temperature and in dry chlorine and hydrogen
chloride may be used in temperatures up to 550℃. Resistance to
mineral acids varies according to temperature and concentration and
whether the solution is aerated or not. Corrosion resistance is
better in de-aerated acid.
Features:
1. Nickel has good mechanical strength and ductility.
2. Excellent performance on corrosion-resistance.
3. High melting point.
4. With good weldability.
5. Low electrical resisitivity.
6. Electrical conductivity.
Specification
| Grade | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
| N4 | 99.9 | ≤0.015 | ≤0.03 | ≤0.002 | ≤0.01 | ≤0.01 | ≤0.001 | ≤0.001 | ≤0.04 |
| N6 | 99.5 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0.005 | 0.002 | 0.10 |
| Ni201 | ≥99.9 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
| Ni200 | ≥99.6 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.15 | / | ≤0.01 | / | ≤0.40 |
| Physical Data | |
| Density | 8.89g/cm3 |
| Specific Heat | 0.109(456 J/kg.ºC) |
| Electrical Resistivity | 0.096×10-6ohm.m |
| Melting Point | 1435-1446ºC |
| Thermal Conductivity | 70.2 W/m-K |
| Mean Coeff Thermal Expansion | 13.3×10-6m/m.ºC |
| Typical Mechanical Properties | |
| Mechanical Properties | Nickel 200 |
| Tensile Strength | 462 Mpa |
| Yield Strength | 148 Mpa |
| Elongation | 47% |
 | |
 |  |
