Active Member
|
[China]
Address: JINGYUAN 7 ROAD, JINGHE INDUSTRIAL PARK， NORTH DISTRICT,XI'AN，CHINA 710200
Contact name:sales
XI'AN BEICHENG ELECTRONICS CO.,LTD |
|
|
VICTOR 1800 Electric Power Tester Satellite Remote Distance Phase Detector
VICTOR 1800 Wireless High Voltage Satellite Remote Distance Phase Detector Frequency Phase Sequence Inspection 32 Tracking Channels
Wireless high voltage satellite remote distance phase instrument, also known as wireless high voltage satellite remote distance phase detector device, is composed of X receiver, Y receiver, X detector, Y detector, telescopic insulation rod and so on.
It can carry on the detecting phase of the power grid, cabinet, the middle cabinet and the switch cabinet, and has the function of the ordinary phase detecting instrument. The satellite timing core can achieve ultra long distance detected phase, basement phase detecting and underground phase detecting , and the time accuracy is less than 30nS.
The receiver uses a 3.5 inch real color LCD screen and a multi mode satellite timing module in one compose of six to support a variety of satellite navigation systems, including China's BDS (Beidou satellite navigation system), American GPS, Russian GLONASS, EU GALILEO, Japanese QZSS and satellite enhancement system SBAS (WAAS, EGNOS, GAGAN, MSAS).
It contains 32 tracking channels, which can receive GNSS signals from six satellite timing systems at the same time, and realize alliance time service to ensure accurate phase detecting.
The receiver displays live-time phase and frequency on the same screen, and has the voice prompt of "X signal normal, Y signal normal, phase to phase, phase difference" and so on, which is clear and intuitive. The distance of the common phase detector in the open ground is 160m around and the distance of the satellite timing phase detector is more than 500km.
It can be used for the full intelligent phase detecting of the voltage line of 10V to 550kV, and can also be used for the low voltage induction point and the high voltage line and the fully sealed circle grid power cabinet, in which the naked wires voltage under 35kV can directly contact the phase detector and the bare wire above the 35kV adopts non-contact, means detector is gradually close to the measuring wire, complete the phase detecting when received the induction of electric field signal , so there is no direct contact with hi-voltage wire, more safe! The phase detecting instrument also has the functions of high voltage electroscope, high voltage phase meter and high voltage phase sequence table. It can be used for power inspection, phase sequence test, transformer group judgement and so on.
Technology specification
| Function | Wireless high voltage-satellite timing-phase detecting, frequency, phase, phase sequence, and electricity inspection. |
| Power | DC 3.7V rechargeable Li-battery,USB charge port,continually working 10h |
| Phase detecting | Satellite second pulse precision mode, satellite timing mode, common mode |
| transmission mode | 315MHz,433MHz wireless transfer |
| Distance of phase detecting | Satellite timing phase detector distance up to 500km |
| Common phase detector: 160m | |
| Display mode | 3.5 LCD display |
| Range | Rank of phase detecting:AC 10V～550kV |
| Phase degree:0°～360° | |
| Frequency:45Hz～75Hz | |
| Resolution | 1°；0.1Hz |
| Accuracy (23℃±5℃,80%RH below) | Satellite phase Detector degree tolerance:≤±5° |
| Common detector tolerance:≤±10° | |
| Frequency tolerance:≤±2Hz | |
| Phase judgement | Same phase: XY receiver detected phase degree variance at range of 0°～30° ； Heterogenous phase: XY receiver detected phase degree at range of 90°～120° or 210°～270° |
| Phonetic function | Voice report: Same phase, Heterogenous phase, normal X signal,normal Y signal |
| Satellite Timing validity | Once the satellite timing successfully, validity time over 30mins to meet the underground phase detecting. |
| Insulation rod length | Stretched length 5m；carrying on length 1m |
| Method of phase detecting | Contact:35kV below bare wire or 110kV with insulation skin.( testing with insulation rod) |
| Non-contact:35kV above bare wire or 110kV above.(testing with insulation rod) | |
| Voice indication | The sound of the probe "Du - Du - Du" buzz |
| Mode switch | Automatic shift |
| Sampling speed | 2times/sec |
| Connecting satellite time | After turning on detector, 1st search satellite takes 3min about, 2nd search satellite takes 30sec, The follow-up heat starts searching satellite time about 1 second, detector positive set up and keep level of heaven |
| Timing accuracy | Less 30nS |
| Instrument size | Detector: LxWxT 145mm×60mm×48mm |
| Receiver:LxWxT 250mm×100mm×40mm | |
| Background brightness adjust |
press ↑ ↓ adjust background brightness |
| Induction strength control | According to the different electric field of induction, the detector can automatically control magnification and facilitate the detecting phase in dense wire area. |
| Hold data | 1st Press HOLD to save date,2nd cancel date |
| Quit | Press ESC button return interface |
| Data lookup | Press ENTER look up data, press ↑↓ review |
| Symbol of satellite searching | Dynamic display “----”symbol at period of search satellite |
| Automatically power off | Standby 30min, then power off automatically for power saving |
| Rated current | detector:35mA max；receiver:300mA max |
| Batter voltage | The detector low battery symbol display when voltage lower 3.2V, remind of charge battery |
| Instrument weight | detector:205g(contains battery) |
| receiver:395g(contains battery) | |
| Insulation rod:1.45kg | |
| Total weight:12.6kg(contains meter box) | |
| Working humiture | -10℃～40℃；80%Rh below |
| Storage humiture | -10℃～60℃；70%Rh below |
| interfere | No interfere except especially Strong magnetic field, no interfere except same frequency 433MHz,315MHz |
| Insulation strength | Insulation rod:AC 110kV/rms(5sections after stretched) |
| detector:2000V/rms( rod connection ends to detector top) | |
| receiver:2000V/rms(outer shell two ends ) | |
| structure | Anti leak type II,IP63 |
| Proper Standard | GB13398 92, GB311.1 - 311.6 - 8, 3DL408 91 standard and national new electric power industry standard "DL/T971-2005 for universal technical conditions for portable 1kV to 35kV portable phase detector apparatus for live work" |
| Ideal for IEC61481－A2:2004；IEC 61243－1 ed.2:2003 standard |
