Xinxiang AAREAL Machine Co.,Ltd |
|
Double Cylinder Crushing And Grinding Equipment Vertical Mill Grinding Equipment
Overview of Double Cylinder Vertical Vibration Mill:
2ZM series double cylinder vertical vibration mill is a new
type of energy-saving grinding equipment. It has obvious advantages
over the traditional rotary mill in grinding fine powder and
ultra-fine powder materials (2~5 times higher efficiency and
20%-30% lower energy consumption).
The double cylinder vertical vibration mill has the
advantages of high vibration intensity, high milling efficiency,
low power consumption, low noise, compact structure and convenient
installation and maintenance etc. This machine can be widely used
in mineral processing, building materials, abrasive materials,
powder metallurgy, electric power, ceramics, refractory materials,
magnetic materials, chemicals, food and other industries. It is an
ideal replacement product for ball mills.
Structure and Working Principle of Double Cylinder Vertical Vibration Mill:
The machine is mainly composed of a chassis, a body bracket,
a soundproof cover, a machine body, a grinding cylinder, a
vibration exciter, a lining plate, an elastic support, a grinding
medium and a drive motor.
1. The chassis supports the body through elastic support and keeps
the flexible connection distance between the driving motor and the
vibrating body unchanged.
2. The soundproof cover is used to block the noise generated by the
mill during operation, in order to reduce the impact of noise on
the whole working area.
3. The machine body is fastened with a grinding cylinder and is
equipped with a vibration exciter.
4. The grinding cylinder is the working body of the mill for
grinding, which is used to hold the grinding medium and grinding
material.
5. The vibration exciter is used for converting the rotating torque
of the motor into the periodic vibration of the mill.
6. The lining plate is closely attached to the inner wall of the
grinding cylinder to protect the grinding cylinder. When the
material is vibrated in the grinding cylinder, the inner wall of
the grinding cylinder is also greatly worn at the same time, and
the lining plate which is easy to replace in the grinding cylinder
can improve the service life of the whole machine.
7. The elastic support makes the mill body in an elastic state, and
substantially isolates the vibration shock to the base when the
body vibrates.
8. The grinding medium is the grinding body of the mill, and is
used for impact grinding of the material.
9. The motor supplies energy to the mill for grinding.
When the power is turned on, the motor drives the exciter to
rotate through the flexible coupling, generating sufficient
exciting force to make the mill body enter the ring periodic
vibration state, and the vibrating pendulum impact force is
continuously transmitted to all the materials loaded into the
grinding cylinde (i.e the medium and the material to be ground).
The ground material is pulverized and ground by the mutual impact
between the grinding medium and the material to be ground.
Installation and Adjustment of Double Cylinder Vertical Vibration Mill:
The motor bracket of the machine is bolted to the chassis.
When installing, after leveling the frame, the body part of the
mill is placed on the elastic support, and the motor shaft and the
machine spindle (exciter shaft) are aligned on the same center
line, and connect the flexible coupling.
The following work must be done well before the machine is
turned on.
1. Fill in the grinding medium. No grinding medium, do not
start the machine, in case that the machine is too light to cause a
run-away accident.
2. Connect circulating water for cooling. Circulating water
has two functions: one is to reduce the temperature during bearing
operation to protect the bearing; the other is to absorb the heat
generated during vibration grinding in the vibrating grinding
cylinder by adding the circulating water in the jacket to the
material which can not withstand the higher vibration grinding
temperature.
3. The sound-proof cover is installed to reduce the
influence of the machine noise on the working area.
4. The motor power of this series of vibration mill is
relatively large, and it is recommended to use step-down start to
reduce the impact on the power grid during start-up. In general,
special electric cabinet is not configured. Special requirements
can be customized separately.
5. If require continuous automatic feeding and continuous
automatic discharging, our factory can configure automatic feeding
and discharging device for users.
6. According to the different grinding materials, the
required vibration grinding strength is also different. For this
purpose, people can increase or decrease the secondary eccentric
block. When a large exciting force is required, the secondary block
can be fastened and connected to the eccentric device by a bolt,
otherwise, remove the secondary block.
Technical Parameters of Double Cylinder Vertical Vibration Mill:
Model | 2ZM-100 | 2ZM-200 | 2ZM-400 | 2ZM-800 | 2ZM-1200 |
Grinding Method | dry method, wet method, open circuit, closed circuit | ||||
Feeding Particle Sise | 0-25 mm | ||||
Discharge Particle Size | 0.3-0.074 mm | ||||
Cylinder Volume (L) | 100 | 200 | 400 | 800 | 1200 |
Capacity (t/h) | 0.1-1.5 | 0.2-3 | 0.5-5 | 1-10 | 1-16 |
Amplitude (mm) | 9-14 | 9-14 | 8-11 | 7-9 | 7-9 |
Power (kw) | 17-22 | 22-37 | 45-55 | 55-75 | 75-90 |
vibration frequency (times/min) | 16.3 | 16.3 | 16.3 | 16.3 | 16.3 |
Weight (t) | 2.5 | 4 | 6.6 | 11.5 | 14 |
Dimensions (L*W*H) (mm) | 2612*1654*2054 | 2900*1884*2378 | 3800*2350*24900 | 4843*2956*2510 |
Contact: Ms. Magie
E-mail: sale@aarealmachine.com
magiecn@gmail.com
WhatsApp/WeChat: 0086-15637361027
Website: https://www.aarealmachine.com