|
[China]
Trade Verify
Address: Intersection of Renmin Road and Xihuan Road,Xinxiang City,Henan Province
Contact name:Kristi
EVERSUN Machinery (Henan) Co., Ltd |
|
Verified Suppliers
|
|
|
V Type Mixer Dry Powder Mixer Machine V Blender
Main Structure Features:
This machine adopts labor feeding and enclosed flapper valve for
discharging. It will not produce powder dust, and it also will not
produce mechanical compression and strong friction during mixing.
So the material particles can remain intact. The mixing barrel is
made of stainless steel, which won’t pollute the material. Besides,
this machine has timing device, which can control the mixing time
of materials.
Working Principles:
The reducing mechanism drives the barrel rotary, and the length of
two barrels is different, which will produce asymmetry. And then
the machine take advantage of this asymmetry for mixing materials.
When the machine is running, materials from the decomposition to
the combination, as potential energy differences, which will
produce lateral force to promote the horizontal exchange of
materials; and materials from the combination to the decomposition,
as materials plane differences, which will produce lateral force to
promote the horizontal exchange of materials again. The barrels
rotary one cycle, which will make 25% of materials flow from one
barrel to the other one; at the same time the materials will also
produce radial flow, and then the materials can horizontally and
radially decompose, alternating combination, so that the materials
can mix evenly.
Operation and Maintenance:
1. Connect the power first, setting the required mixing time, then
turn on the switch, the machine begin running. 2. After the mixing,
if you found that the position of discharging port is not the best
position, you should turn off the power first, and adjust the
position of discharging port. 3. Before you use the machine, you
should check the appliance, if it is normal; and check the covers
of mixing barrels, if the covers are tightly closed. 4. User should
clean the machine after the finish of work, especially the barrels,
prevent the residual materials. 5. Note that the reducer should be
added enough lubricating oil(generally use the 30 # machine oil),
and the transmission should be added grease lubricant. 6. Users
should maintain the machine once each half of year, change the
lubricating oil of reducer, check if the appliance is aging, the
appliance should be replaced if it is aging. 7. After you have been
using the machine for one year or more, you should make a big
maintenance, check the gab between each parts, and appropriately
adjust them, so that the machine can keep in good condition.
Product parameters
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Machine can be customized based on your need | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
What information you need provide before we quote for you
1. What capacity Mixer machine do you need?
2. What voltage of machine do you need?
3. What material do you want to mix?
4. Whether need other auxiliary machine?
Product Structure
Features
1. It is used to mix the dry-powder, granular materials with good
liquidity.
2. It consists of two asymmetric cylinders. The materials can flow
as vertical and horizontal direction. The mixing uniformity will be
above 99%.
3. It adopts vacuum feeding under sealing state. There’s no driving
structure inside and be clean, no dead corner in according with GMP
standard.
