Home Companies Labtone Test Equipment Co., Ltd

Mechanical Shock Tst Machine With 50kg payload Performs Half sine 100g 11ms

Contact Us

[China]

Trade Verify

Address: B1, No.6, Yanhai Road, Chongtou District, Chang'an Town, Dongguan City, Guangdong Province, China

Contact name:Labtone

Labtone Test Equipment Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Mechanical Shock Tst Machine With 50kg payload Performs Half sine 100g 11ms

Country/Region	china
City & Province	dongguan guangdong
Categories	Power Cables

Product Details

Mechanical Shock Tst Machine With 50kg payload Performs Half sine 100g 11ms

Product description

SKT series is the best solution in shock machine's to ensure prodcuts such as smartphones,tables.computers and other mobile devices are able to withstand shock. By appling high acceleration to computer parts, smart phones, tables. laptops,cellular phones. and various mobile products to conduct product fragility test.

Model	HSKT10	HSKT10M	G-HSKT15	G-HSKT30	G-HSKT35
Table Size(mm)	200 x 250	200 x 200	250 x 250	250 x 250	250 x 250
Max. Payload (kg)	10	5	10	10	10
Shock Pulse	Half Sine Wave
Acceleration Range(G)	20~2000	20~3000g	20~15000	20~30000	20~35000
Pulse Duration(ms)	0.2~18		0.1~11

Model		SKT30	SKT50	SKT100	SKT200	SKT300	SKT600	SKT1000
Table Size (cm)		40 x 40	50 x 60	70 x 80	100 x 100	120 x 120	150 x 150	200 x 200
Max. Specimen Weight(kg)		30	50	100	200	300	600	1000
Max. Acceleration (G)	Half Sine	600	600	600	500	500	300	300
	Saw-tooth	100	100	100	100	100	100	100
	Square		150	150	150	100	100	100
Pulse duration (ms)	Half Sine	30—0.5	30～1	30～1	30～2	20～3	20～3	20～3
	Saw-tooth	18～6	18～6	18～6	18～6	18～6	16～6	18～6
	Square		30～6	30～6	30～6	30～6	30～6	30～6
Controller cabinet dimension(cm)		W55D50H80
Machine weight(Kg)		1900	2300	3200	4200	8500	15500	21500
Power supply		3(phase) AC380V 50/60Hz Compressed air 0.5～0.8MPa
Standards		GB/T2423-2008 GJB1217 GJB360.23 GJB150 GJB548 MIL-STD-202F IEC-68-2-27 MIL-STD-883E MIL-STD-810F ISTA UL

Equipment configuration

No.	Equipment name	Model	Qty.
1	Shock tester table	SKT30A	1 set
2	Hydraulic lifting mechanism		1 set
3	Controller	SKC-2	1 set
4	Shock measurement device		1 set
5	Sensor		1 pcs
6	Control computer		1 set
7	Waveform generator	Half sine wave/final peak saw tooth wave	1 set
8	Safety device	Audible and visual alarm	1 set
9	Attached accessories	Tools, clamps/instructions, installation disc, etc.	1 set

Purpose of Shock Testing

· The purpose of shock testing is to determine the fragility of products.

· Ruggedness is a desirable product characteristic.

· A certain amount of ruggedness is necessary for the product's proper functioning.

· Manual handling during distribution normally will "exceed" product ruggedness so protective packaging is usually required

· Shock testing can be useful to improve the ruggedness of designs and add value to the product

· Traditional shock fragility testing used SRS techniques because we lacked knowledge of what inputs were likely.

· SRS was well established in architecture and the building industry.

Customer Services

Presales:

Technical consultation: test method, laboratory planning and suggestion.
Equipment selection: selection scheme, FAQ.
Product testing scheme.

In-Sales:

Customer communication and progress report.
Guidance for pre-installation preparation, equipment commissioning and test run.
Calibration (when Third Party’s verification is required).

After-Sales:

Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.

Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.