0 - 120cm Drop Height Large Drop Test Machine Meet Standard of IEC68-2-27

0 - 120cm Drop Height Large Drop Test Machine Meet Standard of IEC68-2-27

Introduction 

Drop tester for heavy packaged freight are mainly used for assessing the ability of large package products to bear drop in the process of handling, transport and loading and unloading, including design of a cushioning package, selection of packaging materials, fragility of package, goods in standard testing package (surface, angle and edge), etc. They are used for assessing the protection capability of packages for goods, thus providing a basis for package design, selection of cushioning materials for package, and improving the package design.

Specification

• Drop height range: 0 to 1500mm
• Max. load: 300kg
• Height display: LCD
• Machine type: E-shaped Fork
• Control means: PLC and touch panel
• Setting method: touch panel
• Drop mode: free drop
• Height adjustment means: motor and precision ball screw
• Volume of test specimen: 1200mm×1200mm×1200mm
• Cushioning mechanism: Hydraulic Cushion + High Pressure Brake Device
• Drop tester table’s dimensions (mm): 2100 (W) × 1700 (L) × 2800 (H)
• Base plate dimensions (mm): 2000 (W) × 1600 (L) × 300 (H)
• Power supply: three phase 380V/50HZ
• Air pressure requirement: ＞ 0.7MPa
• Equipment weight: about 2300kg

Operating Principle

 

The machine will move the drop platen which carrying the package under test to the set height, then freely fall the package at flat, edge and corner position. During test, the platen will drop at large than 1G acceleration to ensure the package performs free fall condition.

 

 

Product Description

 

For the massive packing goods and the mass is large, the vertical drop height is relatively low in the transportation and handling. So the Standard Free DropTest Equipment for Heavy Packaged Cargo is relatively low. This drop tester is mainly used for larger package drop test. Zero height drop tester use a quickly moves down E fork mounting as bracket. The specimen place balance as the test requirment(plane, edge,angle). When doing the test, the bracket do high-speed downward movement before the specimen, acceleration >3g, it need guarantee the bracket separate with the specimen and realize free fall. The standard drop height range is 2.54cm-120cm.

 

 

Packing: