Active Member
|
[China]
Address: S&T Building, Baiwang Xin Industrial Park, Xili,Nanshan District, Shenzhen, China,518055
Contact name:Tim
Shenzhen Kinda Technology Co., Ltd |
|
|
Spindle VFD Variable Frequency Drive Engraving Machine Application 1.5KW
With its unique super performance and superior cost performance, the inverter meets the performance requirements of wide range of speed regulation, high speed stability, strong overload capability, large low speed torque, short acceleration and deceleration time, etc. Level speed regulation, according to different engraving objects or engraving process, change the spindle cutting speed in real time. It is widely used in medium and high-end engraving machines that require high and fine engraving process.
| Item | Technical Index | Specification |
| Input | Input voltage | 1AC 220~240V±15% |
| Input frequency | 50/60Hz±5% | |
| Output | Output voltage | 0~rated input voltage |
| Output frequency | 0~6000Hz | |
| Operation command mode | Terminal control | |
| Keypad control | ||
| Serial communication control (Modbus) | ||
| Overload capacity | 150% / 120s, 160% / 60s, 180% / 10s, 200% / 1s. | |
| Starting torque | 0.5Hz/180% (SVC); 1Hz/150% (V/f) | |
| Speed control precision | ±0.5% (SVC) | |
| Carrier frequency | temperature and load characteristics 0.5~16.0kHz, automatically adjusted according to | |
| Frequency accuracy | Digital setting: 0.01Hz | |
| Analog setting: maximum frequency ×0.05% | ||
| Torque boost | Automatically torque boost; manually torque boost: 0.1%~30.0 | |
| Acceleration/deceleration mode | Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.0s~65000s | |
| Braking unit | build-in standard. | |
| DC braking | DC braking when starting and stopping | |
| DC braking frequency: 0.0Hz~maximum frequency | ||
| Braking time: 0.0s~25.0s | ||
| Jog operation | Jog acceleration/deceleration time: 0.1s~3600.0s Jog operation frequency: 0.0Hz~maximum frequency | |
| Simple PLC & multi-step speed operation | It can realize a maximum of 16 multi-step speeds running via the built-in PLC or control terminal. | |
| Built-in PID | Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.) | |
| Automatic voltage regulation | Keep output voltage constant automatically when input voltage fluctuating | |
| Control Function | Torque control | Torque control without PG |
| Wobble frequency control | Multiple triangular-wave frequency control, special for textile | |
| Timing/length/counting control | Timing/length/counting control function | |
| Fault protection function | Comprehensive protections include over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running data while failures happen. | |
| Input/output terminals | Input terminals | Programmable digital input: 7 multifunctional inputs, one can be work as high speed pulse input.3 programmable analog input:AI1, AI2, AI3: 0~10V / 4~20mA |
| Communication terminals | Build-in standard RS485 communication interface, support MODBUS-RTU communication protocol | |
| Output terminals | 2 relay outputs, | |
| 2 open collector outputs, | ||
| 2 anaalog outputs, 0~10V / 4~20mA | ||
| Human machine interface | LED display | Display frequency setting, output frequency, output voltage,output current, etc. Two lines display |
| Environment | Ambient temperature | -10~50°C, without direct sunshine. |
| Humidity | 90%RH or less (non-condensing) | |
| Altitude | ≤1000M: output rated power, >1000M: output derated | |
| Storage temperature | -20~60°C | |
| No | Items | KD330 |
| 1 | Reliable hardware | Only first-class componens are built-in. |
| 2 | Rubust design | IGBT current > 2 times of inverter output current |
| Capacitor > 50uF/A | ||
| 3 | PCB aging test | 100% test, 50°C, 12 hours. |
| 4 | Finished products aging test | 100% test, 50°C, 24 hours. |
| 5 | Loading test | Two times, 100% tested: |
| 1. After manufacturing. | ||
| 2. After aging test. | ||
| 6 | Grouped pulse testing | Without failure under 4500V (better EMC performance). |
| 7 | Electrostatic testing | 1. Noncontact conditions -- without failure under 10000V. |
| 2. Under contact condition -- without failure under 5000V. | ||
| 8 | High overload capacity | 150% / 120s, 160% / 60s, 180% / 10s, 200% /1s |
| 9 | Big start torque | 0.5Hz/150% (V/f), 1Hz/150% (SVC) |
| 10 | LED display | >7,5kW, two lines parameters dispaly, convenient for commissioning and operating. |
| 11 | EMC filter | C3 level EMC filter build-in standardly |
