Hefei Hengcheng Industrial Equipment Technology Co., Ltd |
Verified Suppliers
|
|
High Efficiency Slag Grinding Vertical Roller Mill Gypsum Pulverizer Machine
Description
The slag vertical mill is mainly used for the production of slag fine powder. Hefei Hengcheng slag vertical mill can produce slag fine powder of ≥420m2/kg.
Hefei Hengcheng HVM vertical mill has the advantages of high
grinding efficiency, low power consumption, large feeding particle
size, easy adjustment of product fineness, simple equipment
process, small footprint, low noise, small dust, easy use and
maintenance, It has the advantages of low operating cost and low
consumption of wear-resistant materials.
Can be widely used in electric power, metallurgy, cement, chemical
industry, non-metallic minerals and other industries, mainly used
for cement raw meal, clinker, power plant desulfurization limestone
powder, slag powder, manganese ore, gypsum, coal, barite, calcite,
aluminum Bauxite and other materials are ground for processing.
Technical Data
Model | HVM2500 | HVM2800 | HVM3400 | HVM3700 | HVM4200 | HVM4500 | HVM4800 | HVM5100 | HVM5600 |
Grinding Table Median Diameter(mm) | 2500 | 2800 | 3400 | 3700 | 4200 | 4500 | 4800 | 5100 | 5600 |
Capacity(t/h) | 23-26 | 50-60 | 70-83 | 90-110 | 110-140 | 130-150 | 150-180 | 180-200 | 200-220 |
Raw Material Moisture | <15% | ||||||||
Product Specific Surface Area | ≥420㎡/kg | ||||||||
Product Moistrue | ≤1% | ||||||||
Main Motor Power(kW) | 900 | 1800 | 2500 | 3350 | 3800 | 4500 | 5300 | 6150 | 6450/6700 |
Illustrate | Re:Mining slag bond index≤25kWh/t,Steel slag bond index≤30kWh/t,The output will decrease by 30%-40% when grinding steel slag micro power |
【Product Advantages】
(1) High grinding efficiency and low energy consumption. Compared
with ball mills, energy consumption is 40%-50% lower;
(2) The single-machine production capacity is large, and the
low-valley electricity can be used;
(3) Vertical grinding technology and equipment is a new technology
of energy saving and consumption reduction vigorously advocated by
the state
(5) The grinding roller can be pulled out of the machine by
hydraulic device, the replacement of the roller sleeve lining plate
and the maintenance space of the grinding machine are large, and
the maintenance operation is very convenient;
(6) The roller sleeve can be turned over to extend the service life
of the wear-resistant material; (7) There is no need to put cloth
on the grinding disc before starting the machine, and the mill can
be started with no load, eliminating the trouble of difficult
starting;
(8) The wear is low, the grinding roller and the grinding disc
lining are made of special materials, and the service life is long;
【Working Principle】
The motor drives the grinding disc to rotate through the reducer,
the material falls into the center of the grinding disc from the
feed inlet, and the hot air enters the mill from the air inlet.
Under the action of centrifugal force, the material moves to the
edge of the grinding disc, and is crushed by the grinding roller
when it passes through the annular groove on the grinding disc.
Re-grinding, when the material in the airflow passes through the
dynamic and static separator, under the action of the rotating
rotor, the coarse powder falls on the grinding disc for
re-grinding, and the qualified fine powder is milled together with
the airflow and collected in the powder collecting device, which is
product. Moisture-containing materials are dried during contact
with hot gas to achieve the required product moisture.