Hefei Hengcheng Industrial Equipment Technology Co., Ltd |
Verified Suppliers
|
|
High Efficiency Super Fine Bauxite Grinding Mill For Stone Powder Production Line
Description
【Material Introduction】
Bauxite, also known as bauxite or bauxite, is mainly composed of
alumina, which is a hydrated alumina containing impurities and is
an earth-like mineral. White or off-white, brownish-yellow or light
red due to iron content. Hardness 1~3, opaque, brittle, extremely
difficult to melt, insoluble in water, soluble in sulfuric acid and
sodium hydroxide solution. Mainly used for aluminum smelting,
refractory products, abrasive materials, aerospace, communications,
instrumentation, machinery, casting of medical equipment, etc.
【Applicable Materials】
Bauxite, kaolin, barite, fluorite, talc, water slag, lime calcium
powder, wollastonite, gypsum, limestone, phosphate rock, marble,
potassium feldspar, quartz sand, bentonite, manganese ore and other
hardness Mohs 7 materials below grade.
HVM type vertical mill is a kind of safety, environmental protection, energy saving, high efficiency, which is designed and developed through painstaking research on the basis of widely absorbing the advanced technology of various vertical mills at home and abroad and drawing on a lot of engineering application experience. Advanced grinding equipment integrating drying, grinding, powder selection and conveying functions. The main performance and economic and technical indicators of the equipment have reached the international advanced level.
Technical Parameters Table
Specifications | HVM800 | HVM1250 | HVM1300 | HVM1500 | HVM1700 | HVM1750 | HVM1900 | HVM2400 | HVM2400 | HVM2500 |
Grinding table median diameter | 800 | 1250 | 1300 | 1500 | 1700 | 1750 | 1900 | 2400 | 2400 | 2500 |
Capacity(t/h) | 1-3 | 2-7 | 3-12 | 4-16 | 6-24 | 7-27 | 7-28 | 9-35 | 10-39 | 11-45 |
Materials Grain Size(mm) | 0-15 | 0-20 | 0-25 | 0-35 | 0-35 | 0-35 | 0-40 | 0-40 | 0-40 | 0-50 |
Materials Moisture(%) | <5 | |||||||||
Product Fineness(10-40um) | 97% | |||||||||
Product Moisture(%) | ≤1 | |||||||||
Main Motor Power(kw) | 55 | 132 | 180 | 250 | 355 | 400 | 450 | 560 | 630 | 710 |
Re:The data based on Mohs'hardness 3-4 material
The product fineness can reach 10 um(1250 meshes)
【Working Principle】
The motor drives the grinding disc to rotate through the reducer,
the material falls into the center of the grinding disc from the
feed inlet, and the hot air enters the mill from the air inlet.
Under the action of centrifugal force, the material moves to the
edge of the grinding disc, and is crushed by the grinding roller
when it passes through the annular groove on the grinding disc.
Re-grinding, when the material in the airflow passes through the
dynamic and static separator, under the action of the rotating
rotor, the coarse powder falls on the grinding disc for
re-grinding, and the qualified fine powder is milled together with
the airflow and collected in the powder collecting device, which is
product. Moisture-containing materials are dried during contact
with hot gas to achieve the required product moisture.
Product Advantages:
1. High efficiency and energy saving
High grinding efficiency and low energy consumption, compared with
ball mills, energy consumption is 40%-50% lower; single machine
production capacity is large
2. Easy maintenance and low operating cost
The maintenance operation is very convenient; the roller sleeve can
be turned over for use, which prolongs the service life of the
wear-resistant material; the high degree of automation is easy to
operate and saves operating costs;
3. Low comprehensive investment cost
Simple process flow, less system equipment, compact structure and
small footprint
4. Stable product quality
The product has uniform particle shape, narrow particle size
distribution, good fluidity, strong product adaptability and stable
product quality;
5. High reliability
The grinding roller limit device is adopted to avoid the violent
vibration caused by the material cut off during the working time of
the mill; the explosion suppression performance is excellent.
6. Environmental protection
low noise; the system is sealed as a whole, no dust overflow
【Engineering Design】
We have a professional technical team composed of experts and
scholars, senior engineers and postgraduates who have won the
National Science and Technology Progress Award and participated in
the formulation of relevant industry standards. All team members
have more than ten years of experience in large state-owned design
institutes in the industry Experience, has a wealth of engineering
practice experience and theoretical basis. It can provide
professional and systematic engineering design services for
customers in various industries involving grinding system and
pneumatic conveying system engineering, and provide a complete set
of solutions in the field of powder engineering.