SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
Introduction:
This model is a new comer, which is high cost performance:
1, Z axis has 700mm stroke, Z axis than the standard 1060 increase 100mm stroke, suitable for the installation of the fourth axis or processing higher parts products.
2, two line, three line model advantage, line rail with standard roller line rail, bearing capacity and durability enhancement.
3. Optimization of column structure, both sides of the column adopt the same structure as V85P to improve the accuracy and stability of the machine. The fuselage has better seismic resistance under high speed operation
Product Characteristics:
1. Rectangular sliding guide and quenching hardness (≥ 50HRC) are
adopted for guide rail.
2. Ribbed, wide span, long sliding surface spindle box, strong
anti-vibration and anti-torsion ability. These features can ensure
machine body is not deformed under heavy cutting.
3. The joint design of the lengthened nut seat and saddle seat can
effectively avoid the inclination of the worktable at the end of
the stroke and will not cause the deformation of the worktable.
Ensure the minimum bending of the saddle, improve the dynamic
accuracy of the worktable, meet the requirements of heavy cutting,
and greatly improve the cutting rigidity of the machine tool.
Bearing sealing rings.
Specification:
Model | VMC-1160D | ||
Table size | mm | 1200*600 | |
X axis travel | mm | 1100 | |
Y axis travel | mm | 600 | |
Z axis travel | mm | 700 | |
Distance between spindle and table | mm | 110~800 | |
Distance between spindle and column | mm | 654 | |
Spindle rotation speed | rpm | 8000 | |
Spindle taper | BT40 | ||
Spindle motor | kw | 11 | |
T slot size | mm | 5-18*120 | |
X axis rapid feed | m/min | 15 | |
Y axis rapid feed | m/min | 15 | |
Z axis rapid feed | m/min | 12 | |
Cutting feed | m/min | 8 | |
Positioning accuracy | mm/m | 0.008 | |
Min. set moving unit | mm | 0.001 | |
Dimension | mm | 3200*2650*2850 | |
Weight | kg | 6200 | |
Load of table | kg | 800 |
Standard accessories: 1. Mitsubishi/ Fanuc controller system | Optional accessories: 1. Umbrella type ATC |
Application Industry: This series can make marking machine front plat; medical machinery accessories; tool mould; auto part, etc.
Overview:
Package: We have professional logistic team to load and unload the machine, with Aerical crane, forklift.