1250*950mm 1200mm Cnc Deep Hole Drilling Machine Making An Deep
Hole
Product Feature
1. Cast iron is tempered for stress relief to ensure structural
stability without deformation
2. High rigidity and precision ballscrew on three axis , providing
powefull torsion and improving the durability
3. High-quality linear guideway on three axis allow very high
speeds and high table load capacity ensures
max accuracy and durability
4. AC servo motor are direclty connected with ballscrew to allow
stable transmission without any back lash greatly
improves the dynamic rigidity of tranmission and rapid feed
5. Powerful spindle servo motor to satisfy processing at high or
low speed ,auto oil cooling system to ensure constant temperature
during machining .
Processing Range
1. It is application for deep hole working of various types of
workpieces:
a. Moulds (including water pores, hot runners,centre holes, guide
post holes, and ejector sleev holes )
b. Automobile parts ,
c. bent axle levels,
d. hydraulic pipes, etc.
2. Convenience for processing various deep holes,
Specification
Model | TL1100 |
Number of drilling spindle | Uniaxial |
Inner diameter of drilling | 2.5-35mm |
Max depth of drilling | 1200mm |
Size of working table | 1250*950mm |
X axis travel | 1100mm |
Y axis travel | 1050mm |
Z axis travel | 1200mm |
Drilling cutting feed rate | 10-250mm |
Max rotary speed of spindle | 7000rpm |
Spindle motor | (servo)7.5-11kw |
Moving motor from right to left on work table | servo 3.0kw |
Moving motor from up to down on spindle | servo 2.0 kw |
Moving the motor from front to back on spindle | servo 1.5kw |
Pressure of cutting pressure pump | 80 kgf/cm² |
Oil mass of oil pressure pump | 6-60 L/min |
Capacity of cutting oil tank | 700 L |
load capacity of working table | 6000kgs |
machine net weight | 9500kgs |
Machine power | 26kw |
Standard accessories
Taiwan spindle
Fanuc or Mistubishi controller
Spindle oil cooler + NSK Bearing
gundrill + precision guide sleeve and rubber guide
grinder machine
HIWIN linear way