Active Member
|
[China]
Address: BLOCK 64 FUMIN INDUSTRY ,PINGHU TOWN,LONGGANG DISTRIC ,SHENZHEN CITY
Contact name:LISA XIAO
SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
|
Three Axis Cnc Deep Hole Gun Drilling Machine Making An Deep Hole
1200mm With Milling Function
Product Feature
1. Large hole process featuring high effciency, high precision and
high fineness. The fineness reaches
( 0.4~0.8 ).
2. Equipped with powerful milling main spindle and CNC control
system to achieve diversed drilling and milling order at one-time.
3. Equipped with rotating work bench to achieve multi-surface
processing and reduces the clamping times and drill inclined hole.
Processing Range
Main application of CNC deep hole gun drilling machine:
1. processing of heat exchange parts such as chemical industry,
generator, etc.
2. processing of the water hole, thimble hole, pin hole,
electrothermal hole in Rubber and plastic mold industry.
3. processing of valves, dispensers, pumps and other parts in
hydraulic machinery industry.
4. processing of engine block, oil supply system, drive system,
steering machine and steering shaft of automobile and tractor
industry.
5. processing of thrusters, landing gear and other parts in
aviation and aerospace industry.
Specification
| Model | TL1100 |
| Number of drilling spindle | Uniaxial |
| Inner diameter of drilling | 2.5-35mm |
| Max depth of drilling | 1200mm |
| Size of working table | 1250*950mm |
| X axis travel | 1100mm |
| Y axis travel | 1050mm |
| Z axis travel | 1200mm |
| Drilling cutting feed rate | 10-250mm |
| Max rotary speed of spindle | 7000rpm |
| Spindle motor | (servo)7.5-11kw |
| Moving motor from right to left on work table | servo 3.0kw |
| Moving motor from up to down on spindle | servo 2.0 kw |
| Moving the motor from front to back on spindle | servo 1.5kw |
| Pressure of cutting pressure pump | 80 kgf/cm² |
| Oil mass of oil pressure pump | 6-60 L/min |
| Capacity of cutting oil tank | 700 L |
| load capacity of working table | 6000kgs |
| machine net weight | 9500kgs |
| Machine power | 26kw |
Standard accessories
Taiwan spindle
Fanuc or Mistubishi controller
Spindle oil cooler + NSK Bearing
gundrill + precision guide sleeve and rubber guide
grinder machine
HIWIN linear way
