Active Member
|
[China]
Address: BLOCK 64 FUMIN INDUSTRY ,PINGHU TOWN,LONGGANG DISTRIC ,SHENZHEN CITY
Contact name:LISA XIAO
SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
|
Max Swing Diameter Over Bed 420mm Slant Type Cnc Lathe Machine Spindle Through Hole 56mm
Product Feature
1. Y axis have engraving function.
2. This model is for turning, side milling and drilling.
3. Big space for machining, Z/X axis travel is long.
4. Y axis and X axis have 2 living tooleach; X axis can install 3-5 gang tools.
5. Japan gear, low sounds, high precision for Y axis living tool.
6. Spindle with C-axis indexing function.
7. Base and the slanting bed is one piece.
8. living tool max speed is 6000rpm
9. Gsk controller system or Fanuc control system / Other Controller system
Special Model
* The machine is equipped with a drilling slide which enabe the machine to perform O.D and I.D. machining at one time.
* 8-position hydraulic turre or 12-position power turret.
* The spindle accommodates a 6" jaw chuck or collet chuck.
* 30° slant bed structure facilitates chip disposal and easy workpiece access.
* C axis.
* 3 position side drilling device+Y axis.
Applicable industries
CNC machine tool has been applied to the airline industry sector,
gradually expand to the automobile,
shipbuilding, machine tools, construction machinery manufacturing
industry.For copper, aluminum , iron,
plastic and other precision parts manufacturing,applicable to
instruments , watches, cars, motorcycles,
bicycles , eye wear , stationery , hardware, sanitary ware,
electronic components , connectors , computers,cell phones ,
electronics, military and other industries in bulk machining small
parts, especially the more complex parts.
Specification of cnc lathe machine
| Model | HTC4235M |
| Max swing diameter over table | 420mm |
| Max cutting diameter | 420mm |
| Max length of workpiece | 330mm |
| X axis limit travel | 480mm |
| Y axis limit travel | 350mm |
| Spindle rotation speed | 6000rpm |
| Spindle through-hole diameter | 56mm |
| bar diameter | 45mm |
| Spindle head type | |
| Spindle motor power | 5.5mm |
| Spindle motor on-off time | 0-2000rpm:1S 0-4000rpm:1.5S 0-6000rpm:2S |
| Servo motor connection way | direct connection |
| Max rapid feed of X axis | 20m/min |
| Max rapid feed of Z axis | 20m/min |
| X axis motor torque /power | 8NM/1.7kw |
| Z axis motor torque /power | 8NM/1.7kw |
| Y axis motor torque /power | 8NM/1.7kw |
| Driving power head motor torque /power | 10NM/2KW |
| Repeat position accuracy | 0.005mm |
| Power | 8.5kw |
| Diemension | 2030*1665*1814mm |
| Net weight | 2500kgs |
Standard accessories
GSK Or Syntec or Fanuc controller
hydraulic three jaw chuck
5.5KW servo spindle motor
Taiwan spindle
Imported ball screw
Imported linear way
