Welding Stainless Steel Tubing Made of 300 Series in Large Outer
Diameter
Applications: 304 stainless steel is the most widely used of all
stainless steel grades. 304 stainless steel is most notably present
in industrial applications and kitchen equipment.
Characteristics: As a heat-resistant grade, 304 stainless steel
tubing offers good corrosion resistance to many chemical
corrodents, as well as industrial atmospheres. 304 stainless steel
tubing offers good formability and can be readily welded by all
common methods. An extra low carbon variation, called 304L, avoids
harmful carbide precipitation due to welding. This variation offers
the same corrosion resistance as 304, but with slightly lower
mechanical properties.
1. Material:
Carbon Steel:Q235,Q195,Q345,etc
200 series:201 202
300 series :301 304 304L 309S 310S 316L 317L 321 904L
400 series :409L 410 420 430 439 441
2. Size:
Length:5.8-12m
Width: 10-800mm or as customer required
Thickness: 1-3mm
We have a professional processing factory to cut stainless steel
sheets.
3. Surface:
No.4 | It has good gloss and fine lines on the surface. Processing
technology: Polishing and tempering rolling of 2D products or 2B
with 150 ~ 180 abrasive material (JIS R6002). |
HL | It is silver-gray with hair streaks. Processing technology: Polish
the 2D product or 2B product with a suitable size of abrasive
material to make the surface appear continuous grain. |
8K | It is in a mirror state. Processing technology: 2D or 2B products
are ground and polished to a mirror effect with a suitable abrasive
material. |
2B | It is silvery white and better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling+ cold rolling + annealing pickling + quenching and
tempering rolling. |
BA | The surface gloss is excellent and has a high reflectivity, just
like the mirror surface. Processing technology: hot rolling
+annealing shot peening pickling + cold rolling + annealing
pickling + surface polishing + quenched and tempered rolling. |
1D | surface has discontinuous particles, also known as matte.
Processing technology: hot rolling + annealing shot peening
pickling +cold rolling + annealing pickling. |
2D | It is slightly shiny silvery white. Processing technology: hot
rolling + annealing shot peening pickling + cold rolling +
annealing pickling. |
No.3 | has better gloss and rough surface. Processing technology:
Polishing and tempering rolling of 2D products or 2B with 100 ~ 120 abrasive materials (JIS R6002). |
SB | The surface is smooth, the texture is clear, the texture is
delicate, the appearance is comfortable, and the taste is
high-grade.It is widely praised by consumers especially in kitchen
appliances. |
.
You could also ask for other special treatment.We have a stainless
steel processing factory in Wuxi.
4. Standard:
GB JIS ASTM EN DIN AISI
5. Packing:
Standard stainless steel shipping packaging or as customer required.