Carbon Alloy Steel Sheet Hot Rolled Wear Abrasion Resistant Steel Plate

Hot Rolled Technique Customized Size Wear Resistant Plates Made With Carbon Alloy Steel

The main components of the wear-resistant plate are low-carbon steel plate and alloy wear-resistant layer. The alloy wear-resistant layer occupies 1/2 to 1/3 of the thickness of the whole board; because the main chemical composition inside is chromium, it can reach the content of all materials. 20%~30%, so its abrasion resistance is very good.
In many factories, the wear plate is used as a conveyor belt. Because of its strong impact resistance, even if the height difference of the conveyed items is very large, it will not deform, and because it has Very good corrosion resistance, it can maintain a good service life no matter what is transmitted.

Features
1. Impact resistance: The impact resistance of the wear plate is very good, even if there is a very high drop in the process of conveying materials, it will not cause much damage to the wear plate.

2. Heat resistance: In general, the wear-resistant plates below 600 degrees can be used normally, and if we add some vanadium and molybdenum when making the wear-resistant plates, the high temperature below 800 degrees is no problem.

3. Corrosion resistance: Since the wear plate contains a large amount of chromium, the corrosion resistance of the wear plate is excellent, so there is no need to worry about corrosion.

4. Cost-effective: The price of wear-resistant plates is 3 to 4 times that of ordinary steel plates, but the service life of wear-resistant plates is more than 10 times longer than ordinary steel plates, so its cost-effectiveness is relatively high.

5. Convenient processing: The weldability of the wear-resistant plate is very strong, and it can also be easily bent into various shapes, which is very convenient to process.

Specifications

Application Place
1. Thermal power plant: the cylinder lining of the medium-speed coal mill, the shell of the fan impeller, the inlet flue of the dust collector, the ash duct, the lining of the bucket turbine, the connecting pipe of the separator, the lining of the coal crusher Plate, liner of coal hopper and crusher, burner of burner, liner of coal hopper and funnel, support tile of air preheater, guide vane of separator. Wear-resistant steel can be used for the steel used in the above machinery.

2. Coal yard: the lining of the feeding trough and hopper, the lining of the hopper, the blades of the fan, the bottom plate of the pusher, the liner of the cyclone dust collector, the coke guide, the lining of the ball mill, the drill stabilizer, the spiral The feeder bell and its base, the inner lining of the kneader bucket, the ring feeder, and the bottom plate of the dump truck. Because the plate is to be used in the coal yard, there are certain requirements for the corrosion resistance and wear resistance of the steel plate. Moreover, the use environment of the coal yard is relatively more complicated. This kind of material needs better resistance. Grind the board.

3. Cement plant: chute lining, end bushing, cyclone dust collector, powder separator blades and guide blades, fan blades and lining, recycling bucket lining, screw conveyor bottom plate, piping components, frit cooling plate Lining, conveying trough lining board. These parts also require wear-resistant steel plates with better wear resistance and corrosion resistance, which requires wear-resistant steel plates.

4. Loading machinery: unloading mill chain plate, hopper liner, grab blade plate, automatic dumper dumper plate, dumper body. This requires wear-resistant steel plates with extremely high wear-resistant strength and hardness. It is recommended to use wear-resistant steel plates with NM500 and NM600 thicknesses of 25-45MM.

5. Mining machinery: linings and blades of mineral and stone crushers, conveyor linings and baffles. Such parts require extremely high wear resistance, and the available material is NM500/600HARDOX500/600 wear-resistant steel plates with a thickness of 10-30mm.

6. Construction machinery: cement pusher tooth plate, concrete mixing tower, mixer lining plate, dust collector lining plate, brick machine mold plate. Because its parts are easy to wear, it is recommended to use wear-resistant steel plates made of NM360/400 with a thickness of 10-30mm.

7. Construction machinery: loaders, bulldozers, excavator bucket plates, side blade plates, bucket bottom plates, blades, rotary drilling rig drill rods. This type of machinery requires particularly strong and wear-resistant steel plates with extremely high wear-resistant strength. The available materials are NM500/600HARDOX500/550/600 high-strength wear-resistant steel plates with a thickness of 20-60mm.

8. Metallurgical machinery: iron ore sintering machine, conveying elbow, iron ore sintering machine liner, scraper liner. Because this kind of machinery not only needs high temperature resistance, but also requires its extremely hard wear-resistant steel plate. Therefore, we recommend the use of HARDOX600HARDOXHiTuf series wear-resistant steel plates for this type of machinery.