|
[China]
Trade Verify
Address: 4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Contact name:Terry
Shenzhen Veikong Electric Co., Ltd. |
|
Verified Suppliers
|
|
|
Vector Drive VFD PMSM Inverter For Hoist Crane With GPRS Function
VFD530 Series VFD Vector Drive High Precision For Hoist And Crane With GPRS Function
1. Highlights of VFD530 series high precision control VFD
1) High capacity 256K TI DSP with fsster response and higher accuracy for most high standards industries.
2) 2 replay outputs
3) Up to 200% starting torque at 0HZ
4) 5 Digital inputs ( support MAX 9 DI), besides, we have IO 2 for options with 7 DI
5) Support 2 PID loop for HVAC system
2. VFD530 series basic specification
| Item | Specifiation | |
| Model number | VFD530 series | |
| Suitable Motor | Asynchronous and synchronous | |
| Applications | Crane hoist and high precision control machines | |
| Display options | LCD LED shuttle display for options | |
| Warranty | 18 months, if anything broken down during this period, we will be responsible for that | |
| Sells areas | Middle east, south east, Africa, South America etc | |
| Control | Control mode | V/f control Sensorless flux vector controlwithout PG card(SVC) Sensor speed flux vector control with PG card (VC) |
| Operating mode | Speed control,Torque control(SVC and VC) | |
| Speed range | 1:100 (V/f) 1:200( SVC) 1:1000 (VC) | |
| Speed control accuracy | ±0.5% (V/f) ±0.2% (SVC) ±0.02% (VC) | |
| Speed response | 5Hz(V/f) 20Hz(SVC) 50Hz(VC) | |
| frequency range | 0.00～600.00Hz(V/f) 0.00～200.00Hz(SVC) 0.00～400.00Hz(VC) | |
| Input frequency resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.1% | |
| Startup torque | 150%/0.5Hz(V/f) 180%/0Hz(VC) | |
| Torque control accuracy | SVC:within 5Hz10%,above 5Hz5% VC:3.0% | |
| V/f curve | V / f curve type: straight line, multipoint, power function, V / f separation; Torque boost support: Automatic torque boost (factory setting), manual torque boost | |
| Frequency giving ramp | Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s | |
| DC bus voltage control | VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump undervoltage fault | |
| Carrier frequency | 1kHz～12kHz(Varies depending on the type) | |
| Startup method | Direct start (can be superimposed DC brake); speed tracking start | |
| Stop method | Deceleration stop (can be superimposed DC braking); free to stop | |
| Main control function | Jog control, droop control, up to 16-speed operation, dangerous speed avoidance, swing frequency operation, acceleration and deceleration time switching, VF separation, over excitation braking, process PID control, sleep and wake-up function, built-in simple PLC logic, virtual Input and output terminals, built-in delay relay, built-in comparison unit and logic unit, parameter backup and recovery, perfect fault record, fault reset, two groups of motor parameters freely switch, software swap output wiring, terminals UP / DOWN | |
3. Veikong VFD530 series introduction
VFD530 series vector inverter can drive both asynchronous motor and permanent magnet synchronous motor. The product has excellent software performance, supports encoderless vector control and closed-loop vector control, the torque accuracy can reach 5% under encoderless vector control, and encoder feedback can be omitted in most torque winding and unwinding occasions. The product hardware has high reliability, strong electromagnetic compatibility, and the interface is compatible with all optional parts and expansion cards of VFD500.
4. VFD530 used applications pics
5. VFD530 series download center
VEIKONG VFD530 HP AC DRIVE USER MANUAL V1.0.pdf
