|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
160W Bidirection 4m Two Fence 24V DC Motor Remote Control Parking Barrier Gate
1.1 Working temperature(motor): -35℃~+85℃
1.2 Rated voltage:DC24V
1.3 Running speed:1.5s-8s
1.4 Rated current:8.58A
1.5 Rated power:160W
1.6 IP Degree:IP44
1.7 Max length of arm:6M
2.1 The running speed can be adjusted from 1.5s to 8s
2.2 Can be quickly interchanged
2.3 Open the barrier gate by motor wheel when power off ,automatically reset after power on
2.4 Curved crank arm three- link movement structure, the operation is stable
2.5 Wireless remote control control open/close
2.6 Auto reverse function(force adjustable)
2.7 Infrared photocells connector is available
2.8 Loop detector connector is available.
2.9 Well-integrated with car parking system equipment,with wire control(must be switch signal)
| Menu code | Parameter Scale | Parameter name | Default | Unit | Remark | |||
| H00-00 | 25-95 | Open speed adjustment | 40 | Corresponding PWM duty cycle 25%-95%, step size is 1 | ||||
| H00-01 | 25-95 | Close speed adjustment | 40 | Corresponding PWM duty cycle 25%-95%, step size is 1 | ||||
| H00-02 | 5-40 | Open in place decelerate angle | 35 | The larger the angle value, the less likely it is to shake the arm when it is in place. | ||||
| H00-03 | 5-40 | Close in place decelerate angle | 35 | The larger the angle value, the less likely it is to shake the arm when it is in place. | ||||
| H00-04 | 1-20 | Open accelerate adjustment | 1 | ms | The smaller the number, the faster the speed | |||
| H00-05 | 1-20 | Close accelerate adjustment | 8 | ms | The smaller the number, the faster the speed | |||
| H00-06 | 1-30 | Open in place angle | 1 | degree | ||||
| H00-07 | 1-30 | Close in place angle | 1 | degree | step size is 1 | |||
| H00-08 | 7-13 | Auto reverse force adjustment | 10 | A | step size is 1 | |||
| H00-09 | 0-90 | Delay closing adjustment | 0 | second | step size is 100；0 is not closing automatically, Other value will be closing automatically; This parameter is for the situation that there is no loop detector signals and non-automatic operation occasions | |||
| H00-10 | 10-50 | Self-check speed adjustment | 30 | Corresponding PWM duty cycle 10%-50%, step size is 1 | ||||
| H00-11 | 0-2 | Self-check mode | 0 | 0:no operate automatically；1: operate automatically, eliminate after power off； 2:operate automatically,Power failure memory. 3.intelligent automatically operation. | ||||
| H00-12 | 0-5 | Self-lock force adjustment | 0 | 0:Invalid , 1or 2 valid | ||||
| H00-13 | 1-20 | Motor deceleration time when paused | 5 | The larger the setting, the longer the pause time will take | ||||
| H00-14 | 0-1 | Bid-direction setting | 0 | 0:Closing,1:opening | ||||
| H00-15 | 0-2 | Energy saving closing arm direction | 0 | 0:invalid determined by 49 items ) | ||||
| H00-16 | 1-32 | RS485communication address | 1 | Up to 32 slaves can be connected | ||||
| H00-17 | 0-2 | RS485communication rate | 0 | 0:9600,1:19200,2:38400；Change the parameter and will be valid after power on again. | ||||
| H00-18 | 0-2 | Whether to self-check when power on | 1 | 0:no self-check,1:self-check；2:self-check with remote control; | ||||
| H00-19 | 0-3 | self-check setting | 2 | 0:Manually invalid,1:Keyboard SET button, 2:remote control valid,3,Keyboard SET button and remote control both valid | ||||
1 One year’s free servicing is supplied(not including arm and remote);
2 Lifetime charged servicing is offered;
3 Technology servicing is supplied.
The following situations are charged for servicing(or changing):
1Broken by the wrong installation.
2Broken by improper voltage.
3The surfaces of the system destroyed by wrong installation or use.
4Broken by natural disaster.
5Overdue.
6Servicing items out of our promises.
1 Keep the barrier gate clean
2 Check the joints ever month in case of any loose parts.
3 Check the spring elasticity after the barrier gate running 3000 times.
4 Check the easily worn-out parts(like the spring,limit switch),every half year and renew it.
5 Remote control distance will be shortened or not work in case like big object screening,
battery exhausting,extreme weathers.
Wonsun is a professional manufaturer for barrier gate, boom
barrier, sliding gate motor. If any interest, please contact me
freely.
Email: keira@wonsunbarrier.com
Skype: zimin1314
Whatsapp: +86 185 0748 1610
Wechat: Keira_Xia
