|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Bidirection Parking Barrier Gate DC24V DC Brushless Motor Boom
Barrier Fatcory
Technical parameters
1 Working temperature(motor): -35℃~+85℃
2 Rated voltage:DC24V
3 Running speed:1.5s-8s
4 Rated current:8.58A
5 Rated power:140W
6 IP Degree:IP44
7 Max length of arm:6M straight arm
Functions&Features
1 The running speed can be adjusted from 1.5s to 8s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off
,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is
stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
Electrical installation, wiring diagram
1 All the electrical connections are done before delivery and
please do not change it randomly.The necessity
is to connect the AC220V power and grounding connection.
2 Traffic light connector:it can connect power no more than 40W.
3 Infrared photocells an-hit connector: connect the switch signal
for receiver output.
4 Loop detector connectors:it supports both externally and
internally loop detector(only one way can be chosen).
If external type is selected,just connect the switch signal for
loop detector output.
If the internal type is selected,need connect the wire signal to
vehicle detector wire interface.
5 Car parking system connectors: connect the system switch signal
to this connector,then it can control the barrier gate operation.
6 Limit switch signal of up/down:with output COM,NO,NC,it
monitoring the status of the barrier gate.
7 RS485 connector:after chosen the options RS485 module,it can
manage MAX 15 pieces of barrier gates by PC software.
Packing List
| Name | Specification | Qty | Unit | Note |
| Hexagon screw | M12*70 | 2 | Piece | Fixing the boom |
| Boom press board | 1 | piece | ||
| Mounting batten | 2 | piece | Fixing the case | |
| Expansion bolt | M16*150 | 4 | unit | Fixing the case |
| Case Key | 2 | unit | ||
| Remote controller | 2 | unit | ||
| Instruction | 1 | piece |
Function setting description:
When setting the function, please press the menu button on the
control panel, the digital tube displays H00-00 or H00-other
numbers, we correspond to the function parameter table code to
enter the required function parameter setting, for example, H00-00
is the open speed adjustment, and then press the confirm key Enter
the parameter setting, display the number on the digital tube, then
press the up or down key to set the required starting speed digits,
and then press the confirm key to complete the setting of the open
speed.
Other function settings are just as usual.
Function setting parameter table
| Menu code | Parameter Name | Parameter scale | Default | Unit | Remark |
| H00-00 | Open speed adjustment | 25-95 | 40 | Corresponding PWM duty cycle 25%-95%, step size is 1 | |
| H00-01 | Close speed adjustment | 25-95 | 40 | Corresponding PWM duty cycle 25%-95%, step size is 1 | |
| H00-02 | Open in place decelerate angle | 5-40 | 35 | The larger the angle value, the less likely it is to shake the arm when it is in place. | |
| H00-03 | Close in place decelerate angle | 5-40 | 35 | The larger the angle value, the less likely it is to shake the arm when it is in place. | |
| H00-04 | Open accelerate adjustment | 1-20 | 1 | ms | The smaller the number, the faster the speed |
| H00-05 | Close accelerate adjustment | 1-20 | 8 | ms | The smaller the number, the faster the speed |
Learning type remote control
The remote control using special IC learning code remote
controller, 418MHz wireless frequency, strong
anti-interference, long remote control distance, that can up to
100meters in good weather, use easily and
durable. The receiver of learning code remote control can store 16
different remote control codes, and support
unlimited number of same code remote control. The external receiver
learned the remote control within 5
seconds when power on,press the open/close key at the same time to
complete the learning, and reset to
continue learn when not complete. If repeat the learning, open the
external receiver shell, there is a white
button on circuit board, hold down 15 seconds to delete the remote
control code, continue to learn or press
the white button to learn.
FAQ
1-Can you install using loop detector or pressure sensor on it?
Yes,the stanadard advertising barrier gate have loop detector and pressure sensor.
2-How about the guarantee and after sale service?
We have 1 year quality guarantee, We own well tranied and passional sales & aftersale services who can speak fluent English language.
3-How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10
working days longer.
4-How about the payment terms?
TT,western union,our company already joined the trade assurance,it will highly protect your order security.
