Home Companies Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

DC Brushless Motor Toll Barrier Gate

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Contact Us

[China] country

Trade Verify

Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China

Contact name:Keira

Inquir Now

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

DC Brushless Motor Toll Barrier Gate

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

1.5sec Speed Remote Control Car Park Barriers Maintenance Free Backup Batteries

 

 

Safety Precautions:

 

To ensure your safe operation, please strictly in accordance with the provisions of this manual.

  • To avoid personal injury, it is strictly forbidden to open the door or cover when barrier working.
  • The barrier housing must be connected to the ground to prevent inductive electric shock.
  • It is strictly forbidden to stand, walk or place objects under the boom/ arm when barrier working.
  • The boom/arm and the spring have been matched to the balance state before goods leave out our factory.
  • To avoid the danger of the balance being lost, the length and weight of the boom/arm can not be increased or decreased at random. If you need to change it, please ask the professional for advice.

 

Quick details:

 

1 Working temperature(motor): -35℃~+85℃

2 Rated voltage:DC24V

3 Running speed:1.5s-8s

4 Rated current:8.58A

5 Rated power:140W

6 No-load speed:1850rpm

7 Rated speed:1400rpm

8 Output Power:56.8N.m

9 Relative humidity:≤90%

10 Remote control distance:≤100M(in the open place)

11 IP Degree:IP44

12 Max length of arm:6M

 

 

Functions:


1.Arm direction can be quickly interchanged
2. Run speed can adjust from 0.9sec to 6sec, 4sec lift max 6m arm.
3.Arm automaticlly locking when power off, then open the barrier gate by motor wheel
4.Remote control to operate the barrier gate.
5.Auto-reverse when the boom meets obstruction.
6.Infrared photocells connector is available.
7.Loop detector connector is available.
8.Well-intergrated with car parking system equipment,with wire control(must be switch signal).
9.Connector for traffic light(AC220V,power less than 40W)
10.Offering dry contact signal for car parking system(COM,NC,NO)
11.Auto-delay when closing(adjustable)

 

 

Learning type remote control

 

The remote control using special IC learning code remote controller, 418MHz wireless frequency, strong anti-interference,

long remote control distance, that can up to 100meters in good weather, use easily and durable. The receiver of learning

code remote control can store 16 different remote control codes, and support unlimited number of same code remote control.

The external receiver learned the remote control within 5 seconds when power on,press the open/close key at the same

time to complete the learning, and reset to continue learn when not complete. If repeat the learning, open the external

receiver shell, there is a white button on circuit board, hold down 15 seconds to delete the remote control code, continue

to learn or press the white button to learn.

 

 

Arm length speed comparison table

 

Menu codeNumberMenu code nameDefaultsunitRemarks
H00-0025-95Open speed adjustment40 Corresponding PWM duty cycle 25%-95%, step size is 1
H00-0125-95Close speed adjustment40 Corresponding PWM duty cycle 25%-95%, step size is 1
H00-025-40Open in place decelerate angle35 The larger the angle value, the less likely it is to shake the arm when it is in place.
H00-035-40Close in place decelerate angle35 The larger the angle value, the less likely it is to shake the arm when it is in place.
H00-041-20Open accelerate adjustment10msThe smaller the number, the faster the speed
H00-051-20Close accelerate adjustment10msThe smaller the number, the faster the speed
H00-061-30Open in place angle2degreestep size is 1
H00-071-30Open in place angle1degreestep size is 1
H00-087-13Auto reverse force adjustment10Astep size is 1
H00-090-90Delay closing adjustment0Secstep size is 100;0 is not closing automatically,,Other value will be closing automatically;This parameter is for when there is no loop detector signals and non-automatic operation occasions
H00-1010-50Self-check speed adjustment30 Corresponding PWM duty cycle 10%-50%, step size is 1
H00-110-2Self-check mode0 0:no operate automatically;1:operate automatically,remove after power off;2:operate automatically,Power failure memory
H00-120-5Self-lock force adjustment(Invalid)3  
H00-131-20Motor deceleration time when paused5 The larger the setting, the longer the pause time will take
H00-140-1The default direction of operation after self-test0 0:Closing,1:opening
H00-151-10Number of pole pairs(Invalid)4 Only used to correctly display motor speed values
H00-161-32RS485communication address1 Up to 32 slaves can be connected
H00-170-2RS485communication rate0 0:9600,1:19200,2:38400;Change the parameter and will be valid after power on again.
H00-180-1If self-test after power is on1 0:no self-test after power on,1:self-test after power on
H00-190-3Manual self-test adjustment2 0:Manually invalid,1:Keyboard SET button,2:remote control valid,3,Keyboard SET button and remote control both valid
H00-200-15Monitoring parameter setting index7 7,operation times(ms):0~9000
8,Cumulative operation times:0`99999999
9,automatically operation times :0~99999999
10,Collision times:0~99999999
11,Closing in place times:0~99999999
12,Power-on time (minutes):0~99999999
13,power-on times:0~99999999
14,Input port status:Binary display
15,Error code:0~7
H00-210-3reset0 1:rest adjustment
H00-220-1LED output mode0 0:Do not flash alternately during operation;1:Allow flashing
 

 

FAQ

 

1-Can you install using loop detector or pressure sensor on it?

Yes,the stanadard advertising barrier gate have loop detector and pressure sensor.

 

2-How about the guarantee and after sale service?

We have 1 year quality guarantee, We own well tranied and passional sales & aftersale services who can speak fluent English language.

 

3-How long is the leading time?

For standard item

10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10 working days longer.

 

4-How about the payment terms?

TT,western union,our company already joined the trade assurance,it will highly protect your order security.

 

5-How do you send the products to me,how long?

As our products are big volume,and heavy duty, we suggest you to ship by sea. You can also choose your own shipping forwarder.

it normally takes 7-60 days depend on different countries.

 

6-What is the package of the barrier gate?

Inside with a carton package.Then outside,there are wooden crate package.


 


Heavy Duty Vehicle Barrier Gate 50 / 60 OEM Automatic Toll Gate / DC Brushless Motor Toll Barrier With New Curved Arm

OEM Automatic Toll Gate / DC Brushless Motor Toll Barrier With New Curved Arm

OEM Automatic Toll Gate / DC Brushless Motor Toll Barrier With New Curved Arm

Hot Products

Vehicle Barrier Gate 24v Mechanism For Boom Barrier Gate Barrera Automatica Thank you for purchasing ...
Free Maintenance 1.5sec Vehicle Barrier Gate 24V DC Brushless Backup Battery Speed Adjustable With ...
RS485 Speed Adjustable Vehicle Barrier Gate Heavy Duty DC 24V Servo Motor With 12V Backup Battery ...
DC Vehicle Barrier Gate Road Barriers Adjustable Speed1.5-6s Technical Data 1Workingtemperature...
0.6S 3M Arm Servo Motor Barrier DC 24V Backup Battery Ip55 RS485 200W Vehicle Barrier Gate Functions ...
Economical DC Motor Automatic Barrier Gate With 24V DC Motor Brushless Hall Limit Safety Precautions ...