|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Intelligent Vehicle Loop Detector For Parking System
Quick Detail:
vehicle loop detector
Single/double vehicle loop detector is used for wherever vehicles have to be detected, for example for monitoring and safe-guarding accessways or for counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots.
Specification:
| Supply power | AC 110V/220V, ±10%, 50/60HZ , DC 12V |
| Consuming power | Normal 1.0W, Operation 3.6W |
| Operating temperature | -20 -±50C, Humidity 30%-85% |
| Size | 105mm(H) × 75mm(W) ×41mm(D) |
| Quality of material | Aluminum |
| Weight | 342g |
Function:
1) Detection Method : Pass detection mode( Frequency change mode)
2) Detection Range : All of vehicle
3) Sensing Range : LOOP COIL width over vehicle space distance
4) Detection Speed : 0Km-180Km/h
5) Sensitivity: High sensitivity - Low sensitivity ( 8 Level)
6) Alignment : Automatic alignment system
7) Timer Function : 0-14 Second control the time by option
8) Reset Function : Reset bottom when error occur (Automatic:30
SEC, Manual:Option)
9) Output Singnal : NO power relay ( short or long point of
contact)
