|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Metal Detector Vehicle Loop Detector for Access control
Quick Detail:
vehicle loop detector
Application
Loop detectors are used wherever vehicles have to be detected. Like monitoring and safe guarding access ways to counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems in car parks or activating card dispensers in car parks.
The WSTV-410 is a single channel inductive loop detectors. The
principle is based on a change in the inductance within the loop
which is caused by the metallic components of passing vehicles. The
changes are picked up and evaluated by a microprocessor. Ease of
use thanks to automatic calibration when the operating voltage is
applied.
Features:
Single channel inductive loop detectors
Principle is based on change in inductance within loop which is caused by metallic components of passing vehicles
Changes are picked up and evaluated by a microprocessor, easy to use due to automatic calibration when operating voltage is applied
Used wherever vehicles have to be detected, like monitoring and safe guarding access ways for counting vehicles
Output signal can be used for controlling door and gate drive mechanisms, road barriers, controlling traffic light systems in car parks or activating card dispensers in car parks
Specification:
| Supply voltage: | 220V AC , 115V AC,24VDC/AC,12V DC/AC ( See the label on the detector) | |||||||||||||||||||
| Voltage tolerance AC | +10% / -15% | |||||||||||||||||||
| Voltage tolerance DC | ±15% | |||||||||||||||||||
| Power Consumption | 4.5VA | |||||||||||||||||||
| Output relays | 240V/5A | |||||||||||||||||||
| Operating temperature | -220°C to +65°C | |||||||||||||||||||
| Storage temperature | -40°C to +85°C | |||||||||||||||||||
| Frequency range | 20 kHz to 170 kHz | |||||||||||||||||||
| Reaction time | 100ms | |||||||||||||||||||
| Signal holding time | Unlimited | |||||||||||||||||||
| Sensitivity | Adjustable in 3 increments | |||||||||||||||||||
| Loop inductance | Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH | |||||||||||||||||||
| Loop connection wiring | Maximum length 20 meters, twisted at least 20 times per meter | |||||||||||||||||||
| Size of Housing | 78x40x108 mm (L x W x H) | |||||||||||||||||||
