|
[China]
Trade Verify
Address: Guangdong GUANGZHOU SHOP NO.24-25 ,15TH BLOG,JINYONGFU AUTO FITTINGS PLAZA NO.48 YONGFU ROAD,GUANGZHOU,CHINA
Contact name:ling
Guangzhou Weixing Automobile Fitting Co.,Ltd. |
|
Verified Suppliers
|
|
|
977010U000 Auto AC Compressor HS11 Car Cooling Compressor For Hyundai Riona WXHY003
| Car Make |
For Hyundai Riona
|
| Voltage |
12V
|
| Compressor Type |
HS11
|
| Grooves |
7PK
|
| OE NO |
977010U000
|
| Note |
If you need a assistance to make sure that this part will fit your vehicle, please send us the photo of your old product, the OEM and /or the year, make model and engine size of your vehicle so that we may confirm it for you . We also recommend using the compatibility chart in order to make sure that this product will fit your vehicle.
|
ß ß ßWNRLN packaging and shock-proof foams, which have protective functions.
Their thickness is thicker than ordinary box and foam , Relatively speaking, the quality of WNRLN packaging is better than that of ordinary packaging.
ß ß ß It has the advantages of good stiffness and high wear resistance.
It is deeply loved by domestic and foreign customers.
Compressors :
1) Rotary Vane - Panasonic
Rotary vane compressors consist of a rotor with three or four vanes and a carefully shaped rotor housing. As the compressor shaft rotates, the vanes and housing form chambers.
The R134a is drawn through the suction port into these chambers, which become smaller as the rotor turns. The discharge port is located at the point where the gas is fully compressed.
The vanes are sealed against the rotor housing by centrifugal force and lubricating oil. The oil sump and oil pump are located on the discharge side, so that the high pressure forces oil
through the oil pump and then onto the base of the vanes keeping them sealed against the rotor housing.
During idle an occasional vane noise from the compressor may be heard. This is due to the time taken for lubricating oil to circulate through the A/C system.
2)Scroll type - Sanden
This compressor uses a unique design with two scrolls, one fixed and one is movable, both are inter-leaved.
The movable spiral is able to ORBIT or oscillate without actually fully rotating. The movable scroll is connected
to the input shaft via a concentric bearing.
As the movable spiral oscillates within the fixed spiral, a number of pockets are formed between the spiral. As
these pockets decrease in size the refrigerant is squeezed, the pressure increases and is discharged
through a reed valve at the discharge port in the rear section of the compressor.
3)Variable stroke - Harrison V5
The Delphi (Harrison) V5 compressor is a non-cycling variable displacement compressor.
The compressor varies displacement to control capacity to meet A/C system demand at all operating conditions. The compressor features a variable angle wobble plate in five (V5) cylinder axial piston design.
Displacement is controlled by a bellows actuated control valve located in the rear cylinder head. This control valve senses and responds to the system suction pressure or A/C system demand.
Through regulation of compressor crankcase pressure, the wobble plate angle, and therefore compressor displacement is variable.
In general, the compressor discharge pressure is much greater than the compressor crankcase. Which is greater than or equal to the compressor suction pressure.
At maximum displacement, compressor crankcase pressure is equal to the compressor suction pressure.
At reduced or minimum displacement, the compressor crankcase pressure is greater than the suction pressure.
