|
[China]
Trade Verify
Address: Guangdong GUANGZHOU SHOP NO.24-25 ,15TH BLOG,JINYONGFU AUTO FITTINGS PLAZA NO.48 YONGFU ROAD,GUANGZHOU,CHINA
Contact name:ling
Guangzhou Weixing Automobile Fitting Co.,Ltd. |
|
Verified Suppliers
|
|
|
DKS17 1A Car Ac Aftermarket Compressor For Nissan NP300/Navara D22 2.5 2001-2010
Parameter:
| Car model | For Nissan NP300/Navara D22 2. |
| Compressor Model | DKS17 |
| Voltage | 12V |
| Refrigerant | R134a |
| Year Model | 2001-2010 |
| OE NO | 8614995/3V82045010/92600VK500/92600VK510 5060120340/926002TBOA/92600VL30A/3V97045010/926002TB0A/5062118510A |
| Note | If you need a assistance to make sure that this part will fit your vehicle, please send us the photo of your old product, the OEM and /or the year, make model and engine size of your vehicle so that we may confirm it for you . We also recommend using the compatibility chart in order to make sure that this product will fit your vehicle. |
Technical Information
What you need to know
If you’re replacing an A/C Compressor, you have to be prepared to replace additional components in the system depending on the reason why your own
compressor failed. The information provided below was made to help you save TIME and MONEY.
1.) Compressor locked/seized internally:
If your compressor seized internally it was due to insufficient refrigerant or oil in the system or the system was
blocked, leading to overheating of the compressor which caused a breakdown of internal parts.
Visible symptoms:
The oil in the compressor is black and/or has aluminum particles in it. The belt snapped or when the a/c is
turned on, the engine feels like it’s going to turn off.
What you should do:
1. Replace the A/C Compressor (make sure to add PAG Oil)
2. Replace the Receiver Drier/Accumulator
3. Replace the Expansion Valve/Orifice tube
4. Flushing the a/c lines, condenser and evaporator is REQUIRED (We professionally recommend to replace
the condenser on modern vehicles since the passage on the fins are so small that a flush will not remove all
contaminants).
5. Vacuum the system for 30 – 45 minutes. This will remove any moisture in the system.
6. Add the correct amount of refrigerant to the system.
7. Run vehicle on lowest fan setting for about 3 minutes to allow the compressor to cycle the refrigerant and oil.
The reason why it’s important to replace the additional parts listed is because if you add a
new compressor to acontaminated system, the compressor will cycle the contaminants and will eventually lock up again
2.) Compressor is making noise:
There are two possible reasons why your compressor is making noise.
First being that the compressor is suffering from
internal damage due to a lack of refrigerant or oil in the system.This is an early sign that the compressor will seize,
please go back to the first example and follow the instructions.
The second reason is that the
bearing on the compressor is bad.
Visible symptoms:
The compressor makes noise when the a/c is on or off, the clutch has a red/brown discoloration caused by overheating.
What you should do:
With the right tools and some mechanical knowledge,
you can replace the bearing on the compressor without having to remove it from the vehicle.
We carry almost all bearing sizes for a/c compressor clutches.
Please contact us and we will provide you with the item number so you may purchase the clutch bearing.
