Cast Steel Quarter Turn Gearbox WCB Gear Operator Butterfly Valve Gearbox IP67

Quarter Turn Gearbox cast steel WCB gear operator butterfly valve gearbox IP67

SGJ series partial-turn gear operators

This single-stage gear operator series with cast steel box is widely used in gas, oil, chemical plants, and nuclear power plants and for general industrial applications, with the torque ranging from 1000NM to 5600NM and the speed ratio from 30:1 to 140:1.

Instructions for Installation and Operation

Connect the bottom flange of the gear operator to the upper flange of the valve and slide the valve shaft into the hole on the worm gear. Tighten the flange bolt. The valve can be closed by turning the hand-wheel clockwise and opened by turning the hand-wheel counterclockwise. On the upper face of the gear operator, a position indicator and a position marking are mounted, through which the position of switch can be directly observed. The gear operator is also equipped with a mechanical limit screw, which can be adjusted and function to limit the position at the switch extreme position.

Product Features

• WCB casing
• Welded hand-wheel (200 or above)
• IP67 grade protection
• Nickel-plated input shaft, with more resistance to corrosion
• Ductile iron worm gear
• NBR sealing materials
• Suitable for -20℃ ~ 120℃ working conditions

Customization

• 306, 304, LCC, or LCB casing
• IP68 grade protection
• Aluminum-bronze worm gear
• Stainless steel input shaft
• For high temperature up to 320℃
• For low temperature down to -40℃
• Designed with a lock mechanism