High Speed Chemical Mixing Machine / Lotion Making Equipment 1000L

High Speed Chemical Mixing Machine / Lotion Making Equipment 1000L
 
Chemical Mixing Machine description  
 
Advanced hydraulic system to make removing the material very easy also it is very convenient to clean the machine.
The machine unit is composed of four components, an electronic controller, a water phase dissolving tank, an oil phase dissolving tank and the vacuum homogenizing tank.
To guarantee well performances of machines , We import world famous brand for the components like SCHNEIDER electronics,ABB motors,NSK bearings, instruments and so on .will write down the brand name on the list of quotation.
 
High Speed Chemical Mixing Machine
 
1.1 High-speed homogenizing-mixing activity is accomplished by one turbine installed on the center bottom of tank.
1.2 Turbine is composed of dentate stator and rotor with impeller.
1.3 Turbine is made of stainless steel SUS304 or SUS316L, rotating parts pass the dynamic balancing coaxial shaft.
1.4 The timing is controlled by PLC to facilitate the setting of working time. The mixer will not work if the time is not set.
1.5 Adjust speed by frequency control: 1150-3500 rpm 
It is suitable for cosmetic and pharmaceutical company to making cream, lotion, hair color etc. 
· Capacity:1000L
· Material: material contact part SS316L, material non-contact part SS304.
· Customized service: to provide and design total solution as per customer URS
Vacuum Emulsifying Machine including:
· Vacuum emulsifying main machine
· Pre-mixing tank for water and oil material
· Vacuum system
· Hydraulic system
· Control system
· Platform made from SS304
Vacuum emulsifying main machine:
· Slow mixer 0-40rpm with PTFE scraper
· Homogenizer 0-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket 0.3Mpa for steam (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
· Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.
 
After finish one batch, customer can choose positive pressure or rotor pump for material out.
 

 
 
Face cream production processing as following:
Step 1: Prepare raw material
Step 2: Oil phase raw material in oil phase boiler heating and pre-mixing, and water phase raw material in water phase boiler heating and pre-mixing
Step 3:Self-suction oil phase and water phase material to main tank (heating, Homogeneous emulsion to emulsion phase (for example face cream )(in vacuum situation , will without foam )
Step 4: Cooling to 50-60degrees add additive, and then cooling to about 40degrees and discharge to storage tank.
Step 5: Storage about 24hours
Step 6: Filling, packing etc.