|
[China]
Trade Verify
Address: Room 11-11, 10th Building, No. 36, Jianxin East Road, Jiangbei District, Chongqing, China (Mainland)
Contact name:
Sino-NSH Oil Purifier Manufacture Co., Ltd |
|
Verified Suppliers
|
|
|
Lubricant Oil Purification Lubricating Oil Regeneration Plant
Lubricating oil vacuum filter mainly deals with unqualified mechanical oil, hydraulic oil, compressor oil, refrigerating oil and other industrial oil, which can be removed quickly and effectively
Lubricating oil filter
Lubricating oil filter
The moisture, gas, impurities and volatiles in the oil (such as alcohol, gasoline, ammonia, etc.) restore the viscosity, flash point and service properties of the oil.The treated lubricating oil has low emulsification value, little water content and high impurity accuracy, which can be reused repeatedly in high precision hydraulic lubrication equipment at home and abroad.Suitable for petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway and other industries of all kinds of lubrication purification regeneration treatment.
Product Features
1, strong ability to filter impurities, large area, deep precision filter material can remove fine particles in the oil.
2, Automatic backwashing function: automatic cleaning filter [1] intercepted a large number of impurities.
3. Advanced medium heat absorption and condensation system.
4, Lubricating oil filter is equipped with pressure protection, automatic temperature control and heating, automatic separation of condensate water device, drainage during reline operation, simple operation, safe and reliable.
5, Adopt high quality filter material, large amount of pollution, corrosion resistance, high temperature resistance, high mechanical strength, high accuracy in removal of impurities, long service life.
6, unique degassing, dehydration system: using three-dimensional evaporation technology, multi-level oil-water separation technology, rapid separation of water, gas and impurities in the oil.
Working principle
When the oil filter is working, the polluted oil enters the heater through the entrance under the action of vacuum suction under the external atmospheric pressure. The heated oil enters the primary filter, and the large particles of impurities are filtered out. Then the oil enters the vacuum separator and flows through the special divergent device.The divergent device creates a large surface area per unit volume of oil, exposing the contaminated oil to an atmosphere with very low relative humidity, thereby removing water, air and gases from the oil.The mixed gas formed by evaporated water vapor and gas condenses into liquid through the water tank and cooler, and enters the water reservoir together, and the remaining gas is extracted by vacuum.The removed moisture oil is fed into the fine filter by the exhaust pump to remove particulate impurities, that is, the purified oil. A purification process is completed. According to the amount of water content, the water can be completely removed through several cycles.
Another types of our oil purification machines
TF series oil purification Turbine oil purifier system is particularly suitable for
purifying turbine lubricating oil. It also applys to treat
hydraulic, coolant oil and other lubrication in which contain large
of water, vapor, impurities, sludge, dielectric and colloid. It can
eliminate them effectively and efficiently.
LV series oil purification: Lubrication Oil Filter System are suitable especially for
purifying and restoring hydraulic oil, machine oil, coolant oil and
various other lubrication oil.
GER series oil purification: Used oil regeneration system is suitable to regenerate used
internal-combustion engine oil including diesel engine oil,
gasoline engine oil, and used hydraulic oil, other used lubrication
oil of machinery.
GED series oil purification: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.
| Parameter | Value | |
| LV-10 | ||
| Capacity, liters/hour | 600 | |
| Heating Power, kW | 15 | |
| Total Power, kW | 17 | |
| Power Supply | Fully customizable | |
| Inlet Diameter, mm | 20 | |
| Outlet Diameter, mm | 20 | |
| Dimensions (without trailer) | length, mm | 1350 |
| width, mm | 1100 | |
| height, mm | 1700 | |
| Weight (without trailer), kg | 600 | |
| Processed Oil Spec | Water Content, ppm | ≤ 100 |
| Cleaness, NAS(1638) | ≤6 | |
| Filtration Fineness, um | ≤ 5 (or 1-5 as needed) | |
Contact:
Jane Chen
sinonsh315@sino-purification.com
Transformer oil filtration plant
Insulation oil purifier plant
Lubricant oil purifier plant
Turbine oil filtration plant
Waste oil recycling plant
Waste oil regeneration plant
Vacuum pump sets
Oil filter
Contact:
Jane Chen
Email: sinonsh315@sino-purification.com
Tel/Whatsapp: 8618523967058
