|
[China]
Trade Verify
Address: Room 11-11, 10th Building, No. 36, Jianxin East Road, Jiangbei District, Chongqing, China (Mainland)
Contact name:
Sino-NSH Oil Purifier Manufacture Co., Ltd |
|
Verified Suppliers
|
|
|
Transformer Electric Oil Filtration Recycling Equipment for Power
Transformer Oils, transformer oil filter machine
I. Application of Transformer Oil Filtration Machine
NSH VFD insulation Oil Purifier equipment mainly used to improve the
properties of insulation oil. It can remove trace water, gas, particulate matters etc. From the insulating oil, electric oil and transformer oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and
capacitors which have insulation system.
II. Benefits of Transformer Oil Filtration Machine
◆ Low maintenance and replacement expresses.
◆ High performance security system including pressure protection
device and automatic temperature controller makes purifier operate
safely.
◆ Utilizes coacervation technology, coalescing technology,
separating technology and refined purification technology. To
remove free, soluble water, carbon, free and dissolved gases and
particulate matters from insulating oil effectively and rapidly.
◆This machine can work independently, also it can work with the oil
regeneration system that can eliminate the acid, the color and
reduce the PH value effectively, then further enhance the
insulation value of oil.
◆ Breakdown voltage tester for transformer oil is also provided, it print the result automatically.
III. Working Flow of Transformer Oil Filtration Machine
1. Oil will firstly flow through a coarse filter, which can filter
out large particles and mechanical impurities from insulating oil.
2. Oil is heated uniformly by electric heater.
3. The special vacuum tank create a large oil surface and a
resulting thin film, where the oil flows track and static water
evaporation area were expanded to the largest extent, so that the
effect of dehydration and degassing is maximized effectively.
4. After degassing and dehydration under vacuum, the oil is
conveyed by through the fine filter and out of the plant.
5. Oil Circulation is recommended to achieve better effect of
purification and filtration.
IV.Oil Data After Oil Filtration
| Dielectric Strength (BDV) | Kv | ≥75 | |||||||
| Water Content | PPM | ≤3 | |||||||
| Gas Content | % | ≤0.1 | |||||||
| Impurity Size | μm | ≤1 | |||||||
| Dielectric Loss | Tg | ≤0.005 | |||||||
| Interfacial Tension | mn/m | ≥40 | |||||||
V.Machine Specification of Transformer Oil Filtration Machine
| Item | Unit | VFD-30 | VFD-50 | VFD-80 | VFD-100 | VFD-150 | VFD-200 | VFD-300 | |
| Flow Rate | L/H | 1800 | 3000 | 4800 | 6000 | 9000 | 12000 | 18000 | |
| Vacuum Range | Mpa | -0.092 ～ -0.099 | |||||||
| Working Pressure | Mpa | ≤0.2 | |||||||
| Max Vacuum Range | Pa | ≤50 | |||||||
| Temperature Range | ℃ | 20 ～ 80 | |||||||
| Power Supply | 380V/3P/50Hz(or as needed) | ||||||||
| Working Noise | dB(A) | ≤72 | ≤78 | ||||||
| Heating Power | Kw | 24 | 30 | 48 | 60 | 90 | 120 | 150 | |
| Total Power | Kw | 29 | 36 | 56 | 69 | 100 | 132 | 170 | |
| Pipeline Diameter | mm | DN25 | DN32 | DN32 | DN40 | DN40 | DN50 | DN65 | |
| Net Weight | Kg | 600 | 800 | 900 | 1150 | 1500 | 1700 | 2400 | |
| Size | length | mm | 1350 | 1500 | 1550 | 1900 | 2200 | 2400 | 2900 |
| width | mm | 1100 | 1200 | 1250 | 1400 | 1500 | 1600 | 1800 | |
| high | mm | 1700 | 1750 | 1800 | 1800 | 1850 | 1900 | 2000 | |
VI. Available Style of Transformer Oil Filtration Machine
1. Fixing type,mobile type with four wheels and mobile type with
trailer.
2. Normal appearance type,shelf-covering type and explosion-proof
type.
3. Avaliable in different color.
About us:
►We are the leading manufacture near 25 years experience and supply
best quality and highest cost performance oil purification
machines/tratamiento del aceite dieléctrico. Our oil purifier
equipment are built by high quality raw materials with newest
advanced technology by many skilled technicians and professional
workers. We are honest to every customer and responsible for every
machine we sold, we offer great after sales service, anytime when
customer need us, no matter before or after purchase, we are
available online or calling, to make a fast and instant response to
customer.
►we practiced in this industry during all these years, and have
rich on-site experiences too. Any on-site cases, please contact us
for a solution.
►For detailed product specifications, please leave us your email or
mobile no. To send you the catalog. Thank you.
