Fully Enclosed Type Onsite Power Station Use Insulating Oil Filtration System 9000Liters/Hour

Fully Enclosed Type Onsite Power Station Use Insulating Oil Filtration System 9000Liters/Hour

Transformer Oil Purifier

Transformer Oil Purification

Insulating Oil Filtration

Dielectric Oil Treatment

Application:
Fully Enclosed Type Onsite Power Station Use Insulating Oil Filtration System 9000Liters/Hour, It is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can dewater, degas and remove the impurity more deeply with high speed. Also it can inject the insulating oil into the transformers on-line. regenerate the seriously deteriorated oil by removing the polarity materials. This machine is specially applied to vacuum filling oil and drying for power transmission equipments that are over 110KV

Features:
1. PH of treated oil≥5.5 2. Acid value≤0.03mgkoH/g 3.Flash point≥145C 4.Anti-pressure≥60KV 5.Dielectric loss: tgδ(90 C)%≤0.001 6.High vacuum: High point-Vacuum≤5pa Working-vacuum≤35pa 7.High absorption speed: Absorption speed power≥333L/Sr. 8.Duplex 3D stereo-evaporation, eliminating the liquid water quickly 9.UK G technology, by which the trace water that is show chain, such as dissolved water, can be removed effectively. 10.Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 11. Arbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment.

Advantages:
Fully Enclosed Type Onsite Power Station Use Insulating Oil Filtration System 9000Liters/Hour, Besides Double-Stage High-Efficiency Vacuum Insulation Oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility.

Technical Data

Why dewater and degas transformer oil?

water contamination at levels as low as 30 ppm (parts per million) can adversely affect the insulating strength of the oil. With ever-increasing standards for energy efficiency of power distribution transformers, the need to effectively degas will become even more important in the future.

Dissolved gasses in transformer oil can cause arcing, corona discharges, and overheating--reducing the electrical efficiency and lifetime of the transformer.

Double stage high vacuum oil filtration system

In order to acquire optimal dielectric strength and insulating efficiency inside of transformers and circuit breakers, dielectric oils should be kept absolutely clean up and dry.

REXON designs and builds the most effective, durable, and easily operation high vacuum transformer essential oil purification method available on the market today.

Transformer essential oil remedy plant means Old transformer essential oil is generally mixed with gas, water and contaminants, and also the new transformer essential oil sometimes, the content of the contaminants generally raises fast by time.

So the transformer essential oil remedy machines can remove these associated gases, water and contaminants, and separate them in the essential oil and consider them away.

After treating the essential oil by our essential oil remedy plant, the stabilized essential oil is then again ready to become used in energy transformers.

ZYD double stages vacuum transformer oil purifier is mainly used for removing trace water, gas and impurities from insulating oil, improving the insulating oil performance index.

It is mainly applied to purification of 110KV, 220KV, 500KV, 750KV, 1000KV power transmission equipment insulating oil, also applied to treat low viscosity oils, like insulating oil, turbine oil, and hydraulic oil in the transmission equipment which is lower than 110KV.

If water is saturation in the oil, it appears as the liquid states and stay at the bottom of container. Under the vacuum states, because the less gas content, the water and gas in the oil will be escaped from the oil and evacuated by the vacuum pump. The higher vacuum value (Close to 0 Pa), the higher speed of water molecular volatilization (The latest technology, the Vacuum oil purifier can reach to 1Pa Working vacuum value). The gas and water which dissolved in the oil will become gaseity and exhausted by vacuum pump. The oil temperature affect vacuum oil purifier working efficiency, the higher temperature, the water molecular get more kinetic energy, so it is higher diffused speed of water molecular. But, exorbitant temperature will cause fracture of carbon chain for oil molecular, if that will make oil bad. So we don't suggest the oil temperature excess 80℃. Also the impurity will affect oil dielectric strength, so the vacuum oil purifier requires high filtration precision.

Custom built plants can be provided as per customer's specific requirement, such as more flow-rates. These plants work on low temperature, high vacuum principle. Plants mainly consist of heating, filtration and vacuum system. Heating system aids to the filtration and moisture removal. Filtration systems remove suspended particles down to 1 micron such as rust, dirt, scales, colloidal carbon etc. Vacuum Systems remove moisture (emulsified as well as dissolved) down to < 5 – 10 ppm depending on the working vacuum of the plant.

Ms. Yolanda Lei Sales Manager

Chongqing Rexon Oil Purification Co., Ltd

Tel: +86 023 6817 7456 Fax: +86 023 6817 7456

Mobile & Whatsapp: +86 18725628355 Skype: yolanda86123

Email: yolanda@rexonop.com yolanda86123@hotmail.com

Web: http://www.rexonop.com http://www.vacoilpurifier.com

Related Links: http://www.oilrenew.com http://www.taskoilpurifier.com

Add: No.2, Panjin Road, Jiulong Industrial Park, Jiulongpo District, Chongqing, China