|
[China]
Trade Verify
Address: A04 10 B Blocks of Shenzhen Bay Science and Technology Eco-Park SHENZHEN,Guandong,CHINA 518052
Contact name:Cherry liu
TaiMi(Shenzhen) electronics technology Co.,ltd |
|
Verified Suppliers
|
|
|
High Efficiency GAS Flow Meter Sensor 200K Ultrasonic GAS Flow Transducer Sensor
200khz Ultrasonic Gas Flow Sensor Product Description:
Features:
1. The ultrasonic sensor detect gas flow, the transducers are working in couple normally
2. Each Ulltasonic sensor with both transmitter and receiver for gas flow measuring, and also with two output cables.
3. Flexible to customized any size ultasonic sensors for flow measurement to meet different ultrasonic flow meters requirement
Low power gas meter 10mm 200khz ultrasonic transducer
Production details
| model | AF0200K1 |
| Centre working frequency (kHz) | TM-20-200KHZ Ultrasonic Gas Flow Sensor |
| Bandwidth | ±5° |
overall sensitivity 0 dB=3 Vp-p; cycle:8; distance:8cm (transmitter and receiver) | -62dB min |
| Beam angle(-3dBfull angle) | 12±2° |
| electrostatic capacity | 2000PF±20% |
| Minimal parallel impedance | 250Ω±30% |
Maxim operating voltage (Pulse Duty cycle ratio 2%) | <100V |
| Operating temperature | -20~70℃ |
| Protection class | IP65 |
| 200KHZ gas sensor OUTLINE DRAWINGS AND DIMENSIONS | ||||||||
Appearance: No visible damage and dirt. The products conform to the RoHS directive and national environment protection law. Dimensions (Unit: mm)  | ||||||||
| TEST | ||||||||
Test Conditions Parts shall be measured under a condition (Temp.:20℃±15℃, Humidity: 45%~85% R.H, Temperature: 40±5℃.). Test Methods
|
The 200khz air sensor of the series are piezoresistive pressure sensors based on ceramic. The measuring bridge is printed directly on one side of the ceramic diaphragm by means of thick film technology. The rear part of the diaphragm can be exposed directly to the medium to be measured. Because of the excellent chemical resistance no additional protection is normally required.
Thanks to the reinforced outer area (monolithic structure) the sensor can be mounted directly in a case by using an O-ring or else it can be mounted to a metal fitting.
The sensors are designed in such a way so that temperature changes
and overloading do not
cause any loss in reliability. The use of ceramic ensures high
linearity across the entire range
of measurement and reduces effects of hysteresis to a minimum.
Additionally, PPS101 are thermal compensated by PTC resistors. The
offset can be adjusted on
customization specification.
Workshop:
Shipping:
FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece. Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
