Home Companies Qingdao Alston Motors Co., Ltd.

45CBM Pneumatic Cement Trailers Dry Bulker Truck Transporter

Active Member

Contact Us

[China]

Address: 19F, No.232 Changjiang Middle Road, International Trade Center C Seat, Huangdao District, Qingdao, China

Contact name:bruce

Country/Region	china
City & Province	qingdao

45CBM Semi Cement Bulker Transporters Pneumatic Dry Bulk Tank Trailers

Bulk Cement Trailer Description:

Bulk cement trailer’s transmission system: mainly including power take-off, transmission shaft, diesel engine,

air compressor, etc. A dual power system can also be installed, powered by the chassis gearbox and external motor.

Cement tanker trailers are usually equipped with external motors to provide power. The power take-off is powered

by the engine or an external motor, and the air compressor is driven by the transmission shaft to inflate and

pressurize the tank to realize unloading. The power of the air compressor largely determines the speed and

efficiency of unloading.

BULK CEMENT TRAILER SPECIFICATIONS

Trailer Model	40cbm BULK CEMENT TRAILER
Overall Dimension (Lx W x H)(mm)	10700x2500x3950mm
Function	transport bulk powder
Loading Weight( KG)	54000
Thickness(mm)	Tank body: Q235 5mm carbon steel End plate: Q235 5mm carbon steel
Air compressor	12m3/minute Bohai brand
Engine	Diesel engine: Weichai Tianhe 4102
Compartment	1 inner fluidized bed: air bag
Axle	3x13Ton, ZY brand
Suspension system	Mechanical leaf spring suspension
Leaf spring	90(W)mm13(Thick)mm10 Layer
Manhole cover	500mm manhole cover. 2 sets
Discharge valve	4〞butterfly valve
Discharge pipe	4〞
Landing Gear	28Ton, double speed,Yahua brand
Tire	12R22.5, Taitong brand 12units
Traction Pin	2” or 3.5” bolts in, changable
Spare Wheel Bracket	2 pieces
Tool Box	1 Standard
Side guard	According to customer’s requirement
Brake system	Dual Line braking system
Emergency valve	Standard or WABCO
Brake air chamber	Six big double air chambers
Electrical system	1. Voltage: 24v 2. Receptacle: 7 ways (7 wire harness)
	Tail lamp with turn signal, brake light & reflector, side lamp etc.
	One set 6-core standard Cable.
Painting	Shot blast at Standard SA 2.5 prior to application of primer, polyurethane top coat. Total DFT not less than 100um,A layer of anti-rust paint,two-layer finish.
Packing	Polish with wax before shipping