|
[China]
Trade Verify
Address: No. 110, Third Avenue, Hanghai Road, Zhengzhou City, Henan Province, China
Contact name:Amanda zhang
Henan Lishixin Logistics Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
ASME Standard 25000 liter food grade liquid iso tank container for
sale
Advantage of Tank Container:
ISO Tank container is a kind of steel pressure vessel installed in
the fastening external frame. Most
of the tanks are made of 316 stainless steel and equipped with
steam or electric heating device,
inert gas protection device, pressure relief device and other
optional equipment for fluid
transportation and handling.
European, American and Japanese laws stipulate that some goods must
be transported in
tank containers. As a means of Safety transportation, Tank
Container has natural advantages
and become more and more popular in the world.
parameter:
Specifications - T3-T14 iso tank container | ||
Frame Dimensions (L x W x H) | 6058,12192 x 2438 x 2591 mm | |
Nominal Capacity | 25000,47000 litre (±0.75%) | |
Maximum Gross Mass | 36000,75000 kgs | |
Tare Mass | 3510,6200 kg (± 3%) | |
Design Temperature (Frame & Tank) | -40 to +130 °C | |
Pressure | Working | 1.70 bar |
Test | 2.65 bar | |
Material | Tank (Shell & Ends) | SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%) |
Frame | SPA-H or equivalent | |
Insulation | Shell | Rockwool (50kg/m3) 50mm thick on aluminium foil. |
Ends | Glasswool (16kg/m3) thickness to suit on aluminium foil. | |
6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted. | ||
Manhole | 500mm low profile, 8 point fixing with Super Tanktyt Lid seal. | |
Assembly | 1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad. | |
Air Inlet assembly | DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad. | |
Top Discharge | DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad. | |
Bottom Discharge | DN80 45° Univalve Internal Footvalve part no. TBC fitted with an
integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain. | |
Thermometer | A surface mounted analogue type is fitted to the rear end dished
end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar. | |
Document holder | A clear plastic document holder ø110mm is fitted to the rear right
hand side beam. A drain hole is provided at the lowest point. | |
Calibration | A calibration plate marked in cm/litres is fitted on the spillbox
side wall. No calibrated stainless steel grade dipstick and bracket fitted. | |
Design Code | ASME VIII DIV. 1 | |
Approval | IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO
1496/3 | |
Liquid storage tank container is widely used in industries
for liquid transportation
on the road/ rail/ ship and storage.ISO tank container:
1. Inner layer - made of 6 or 8 mm thick Q235-B steel plate,
compared with
ordinary 5 mm thick single-layer tank, the strength is greatly
improved;
2.Outer layer - tempered glass fiber thickness of 4.0mm or
more,
good compressive and seismic resistance. It has strong corrosion
resistance and corrosion resistance.
Unique technology is adopted between the inner and outer layers
to make it reach a gap of 0.1-1mm, so as to eliminate hidden
dangers from the root.
Leak detector 24 hours to monitor, to prevent leakage caused
by security risks.
Product advantages:
1: We can provide different sizes of tank containers from 20 FT to
40 FT, and can accept
customized any special tank containers.
2. iso tank containers, acid, soda, liquefied petroleum gas and
other tank containers. Various
chemicals can be transported and stored
3. Our iso tank containers are mainly exported to Africa, Asia and
South America, such as
Nigeria, Ghana, Kenya, Vietnam, Peru, etc. Our tank containers can
also be exported all
over the world because our standard tank containers are of
international standard.
Product pictures:
Product details:
1). cutting materials for preparing oil tanks manufacture
2). rolling machines for circling
3). welding and NDT(non-defection test) inspection
4). re-circling after welding
5). outer vessel’s abrasive blasting and anti corrosive
painting for outside surface
6). pipe connecting and assembly of inner vessel and outer
vessel
7). valves installation
8). perlite filling
9). vacuum-pumping
10). final painting and ready for shipment
Certificate
Factory Tour:
FAQ:
5.1. Are your container fuel tank brand new?
Yes, all the container we provided are brand new. In fact, we will
produce new container after order confirmation.
5.2 Does your container fuel tank meet with international
requirement?
All of our tank container will be approval by BV or LR or CCS and
meet with below requirement.
ISO 1496/3
UN Transport of Dangerous Goods
UIC International Rail Approval
TIR International Transport Goods under Custom Seal
CSC International Convention for Safe Containers
DOT US Code Federal Regulations CFR49
DOT UK Carriage of Dangerous Goods
CTC Canadian Transport Commission (Rail)
AAR American Association of Railroads
FRA Federal Rail Association USA
BAM G.D.R Domestic Approval
ISO/TC11
5.3 Can you provide Drawings for confirmation?
Yes, we will provide drawing after order confirmed before
production
5.4 Do you have Small or Large Volume Tank Container?
Sure, we could do Tank Container form 1000L to 60000L. And could
produce offshore Tank as per DNV2.7-1 / EN12079 Standard.
5.5 Do you provide OEM Service?
Yes, we have a first-class team and could design as per your
requirement.
