Chongqing Tongrui Filtration Equipment Manufacturing Co.,Ltd |
|
BZ Transformer Oil Decolorization Purification plant
Superiority:
This machine utilizes a physiochemical reaction to eliminate the acidic component, the suspended particles and the sedimentation material etc. from the oil, it mainly used to decolor and reduce the bad odor from the waste transformer oil,hydraulic oil, turbine oil and refrigerant oil, and kerosene,switch oil to limpid clean oil( the color is light yellow)
Technical Features:
1. It adopts a particular purification chemical (Silica Gel) to decolor the transformer oil and refrigerant oil, and the color of oil can be treated from No.6-10 to No.1-2.
2. This machine can operate online under the situation of transformer stays running in normal manner without cutting power or changing oil.
3. After treating, the oil can reach the new oil standard, which not only retains the active elements, but also improves the insulation of device and enhances the ability of anti-oxygen. Besides, the cost will be reduced by 90% compared with traditional way of oil-change. (Suggest: you can use the vacuum Transformer Oil Purification device remove water and impurities before use BZ.)
4. High precision stainless steel strainer is used, which is anti-corrosive, thermostable and has a good mechanical strength.
Guarantees & documentation
TONGRUI warranty the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of twelve (12) months after the start up of the system. TONGRUI’s obligation under this warranty is limited to repairing or furnishing, without change within warranty period.
Specification:
Index name | Unit | BZ-I | BZ-II | BZ-III |
Capacity | Liter/hour | 3,000L/H | 6,000L/H | 9000L/H |
Length | Meter | 1.3 | 1.4 | 1.6 |
Width | Meter | 0.9 | 1.05 | 1.2 |
Height | Meter | 1.65 | 1.65 | 1.85 |
Weight | Kg | 450 | 600 | 800 |
Diameter of inlet&outlet pipe | Mm | DN32 | DN40 | DN40 |
Electric Motor | KW | 1.5 | 2.2 | 2.5 |
Capacity of oil pump | M3/h | YCB-3.3m3/h | YCB-6.0m3/h | YCB-10m3/h |
Speed of oil pump | RPM | 960r/min | 1420r/m | 970r/m |
Type of oil pump |
| Circular Teeth Gear Pump | ||
Work pressure | MPa | ≤0.4 | ||
Breakdown voltage after processing | KV | ≥75 | ||
Flash point | ℃ | ≥135 | ||
Water-solubility acid | PH | ≥5.4 | ||
Dielectric loss factor | tgδ(90℃)% | ≤0.005 | ||
Impurities | Micron | ≤5(no free carbon) | ||
Acid | MgKOH/g | ≤0.03 | ||
Power supply | 380V/3phase/50Hz |