Green Technology Waste Engine Oil Recycling Machine recover To clean Diesel oil

Used engine oil, heavy fuel, bunker fuel,oil sludge,lubricant oil can be regenerated diesel oil,and the waste animal, vegetable oil, acid oil, drainage oil also can be convert to biodiesel oil. these available by-products can be converted as fuel oil directly,which is from the refinery, chemical plant, chemical fertilizer plant, urea plant, coking plant, such as: alcohols, sulfonated oil, naphtha, paraffin wax, benzene, naphthalene, ketones. If we deal these used oil and by-products by burning or burying, it is not only bring serious environmental pollution, also caused a huge waste of energy. So on the basis of reusing resources or environmental protection, or view the point of being able to bring enormous economic benefits for the producers, the waste oil for recycling has a very good prospects.

The main feature

 (1)Equipment composition

1)main components:spray gun,combustor/combustion chamber/burner,reactor,waste oil pump,gas manifold,sludge tank,condenser,oil tank,water seal/water block/hydroseal,induced draft fan/exhaust fan,dust removal chamber,chimney,electric control cabinet etc.

2) Combustor will provide heat energy for the entire process. Under the action of heat energy, the material will be cracked and generated a lot of oil vapor, which will be discharged into gas-oil separator and then passed into oil through condensers.Those incondensable gas will be filtered through water seal and last torched.what’s more ,we’ll handle the black smoke produced during processing in the dust removal chamber.

the main technical characteristics

1.The key parts of the equipment, cracking processor,which adopts a horizontal rotating structure. This structure have those advantages compared with the old ones. The fuel for new style fuel is fuel oil, and the residue generated during the fuel burning can be lived up to the world exhaust emission standards. Therefore, this fuel oil can be used in any country.

2. The heating method for the new style equipment is indirect heating. The advantages of this methods are as follows:
1) When a system problem occurs, turn off all the exhaust fans, you can instantly cut off the heating source to ensure system’s security.
2) The heat exchange distance is 5-7 times more than old equipment, higher thermal efficiency.
3) Greatly extend the life span of the main parts in the equipment,which is 2-3 times than the old equipment.

3.using simple chemical method to solve the product’s color and odor.
4. the output oil is not less than 90%.
5. the appearance of the device: Elegant, economical and practical.
6. the catalytic pyrolysis process and chemical extraction techniques.
7. more perfect environmental protection parts, such as waste gas burner and flue dust chamber.
8. reasonable design, advanced manufacturing technology, high degree automation, perfect security facilities.