Home Companies Beijing Silk Road Enterprise Management Services Co.,LTD

6 Valve Used Engine Blocks Diesel S3L2 For E303 Excavator Water Cooling

Beijing Silk Road Enterprise Management Services Co.,LTD

Contact Us

[China] country

Trade Verify

Contact name:

Inquir Now

Beijing Silk Road Enterprise Management Services Co.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

6 Valve Used Engine Blocks Diesel S3L2 For E303 Excavator Water Cooling

Country/Region china
City & Province guangzhou
InquireNow

Product Details

 

 

S3L2 Diesel Used Engine Blocks For Excavator E303 Water Cooling

 

 

Specification

 

Car name: Engine cylinder block
Model Number: S3L2
Cylinder stroke: 87
Engine type: Diesel
Application: Excavator
valve: 6 valve
Cooling: Water cooling
Injection: Eddy

 

 

Description

 

Cylinder Block Bolting concept


The connection between block and head can be done either conventionally or by the through-bolt technique. In case of conventional bolting, the cylinder head and grey iron bearings are bolted directly to the block resulting in high stresses in the vicinity of the thread and the bolt head. This bolting concept reaches its limits in case of high loaded direct injection diesel engines.

 

In order to prevent high tensile stresses in the engine block, the main bearings and the cylinder head can be connected directly by long bolts which penetrate the whole block and head, thus setting them under compressive stress only (through-bolt concept). The drawback of this solution is a more complicated assembly because bearing caps and cylinder head are not any more independent of each other, i.e. the final assembly of bearings and heads has to be carried out at the same time. This problem can be solved by screwing in the through-bolts so that head and bearing caps can be mounted separately while maintaining the load-bearing benefit of the through-bolt.

 

Open deck concepts


The interface between block and head, the joint face, must reliably seal the combustion chamber. But it also has to provide space for oil and water channels while maintaining at the same time sufficient stiffness against the combustion pressure and the forces coming from the head-block assembly. There are two basic design solutions: the open deck and the closed deck concept. The differentiation between these cylinder block concepts is most important as it determines the applicable casting process.


Open deck:


In the open deck concept, the water jacket is completely open towards the joint face. This design has the disadvantage of relatively low stiffness, but on the other hand, it is the only way to realize the water jacket in the high-pressure-die-casting process with a permanent and retractable steel-core. The weaker structure may lead to higher bore distortions and it must be compensated by increased wall thicknesses or an appropriate cylinder liner concept.


For engines with a high specific power density, the open deck concept can only be applied with difficulties or its application is impossible.

 

 

Hot Products

6D114 Used Engine Assembly For Excavator PC350 - 7 PC360 - 7 Specification Car name: Complete Engine ...
6HK1 Used Engine Assembly For Excavator ZX330 - 3 SY265 Water Cooling Specification Car name: ...
B3.3T 4D95T Used Engine Assembly For Excavator PC120 - 5 JCM908D Specification Car name: Complete ...
C13 Used Engine Assembly For Excavator E349D E349E Electric Water Cooling Specification Car name: ...
3406C Used Engine Assembly For Excavator E245B Water Cooling Specification Car name: Complete Engine ...
6WG1 Used Engine Assembly For Excavator ZX470 - 3 ZX650 ZX800 Diesel Engine Specification Car name: ...