Active Member
|
[China]
Address: Building B6, Junfeng Industrial Park, Fuyong Town, Bao'an District, Shenzhen City, 518103 P.R.China
Contact name:Kevin Huang
Shenzhen Consnant Technology Co., Ltd. |
|
|
The CND310 series Electricity Special UPS system consisting of system cabinet, DBW bypass stabilized cabinet, and PDU feeder cabinet; CONSNANT designs exclusively for power plant, transformer substation, and distribution substation according to the development requirement of China Power. It possesses on-line double conversion and zero transfer function. It can be mainly applied for power system telemechanics, PTU, power line carrier, power system monitoring and so on. After being isolated and filtered by regulator, Single-phase 220V or three-phase 380V can provide stable power for load through inverter when the AC is normal. If the failure of AC power grid supply or a power cut occurs, the backup of DC power system can invert to supply electricity through the reverse diode. If the DC Power System is under voltage or cut off, the static switch will turn to bypass automatically. When the AC power is recover, the static switch will turn to AC power automatically. If the inverter is overloaded or fault, the system will turn to bypass and indicates a warning signal at the same time.
| Model Number | 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | |
| Rating capacity | 8 KW | 12 KW | 16 KW | 24 KW | 32 KW | |
| Rating voltage | 220VAC Single Phase (6-20KVA) / 380VAC Three Phases | |||||
| AC input | ||||||
| Voltage range | ±25% | |||||
| Frequency range | 50/60Hz±10% | |||||
| Soft start | 0 – 100% 5 seconds | |||||
| Power Factor | 0.95(with input filter) | |||||
| Bypass input | ||||||
| Permitted voltage range | ±15% | |||||
| Frequency range | 50/60Hz±5% | |||||
| Output | ||||||
| Voltage accuracy | 220V±1%(steady load) 220V±3%( fluctuating load) | |||||
| Permitted Frequency range | 50/60Hz±0.05Hz(powered by battery) | |||||
| Power factor | 0.8 | |||||
| Waveform Distorition | Linearload<2%, non linear load<4% | |||||
| Dynamic load voltage transients | <5% | |||||
| Crest factor(lpeak/ lrms) | 3:01 | |||||
| Overload capacity | Normal in 110% load, 125% for 10min | |||||
| Efficiency | Double conversion mode: 94%; ECO mode: 98% | |||||
| DC | ||||||
| Battery voltage | 220V; (10-40KVA 110V is optional) | |||||
| Cutoff voltage | 185V | |||||
| Maximum discharge current | 36A | 55A | 73A | 109A | 145A | |
| Panel display | ||||||
| LCD | Chinese/English UPS status, operation instruction input voltage,
output voltage, current, frequency, battery voltage, value of
charge and discharge current, fault display , warning | |||||
| Environment | ||||||
| Temperature | 0ºC-40 ºC | |||||
| Humidity | 0-95%(no condensing) | |||||
| Storage temperature | -25 ºC—55 ºC | |||||
| Altitude | <1500m | |||||
| Physical features | ||||||
| Weight(KG) | Net | 230 | 258 | 350 | 400 | 480 |
| Gross | 250 | 285 | 380 | 425 | 500 | |
| Dimesion W X D X H mm | 800×600×2260 | 800×800×2260 | ||||
| Optional | RS485/SNMP/ Harmonic compensation cabinet/Input and output
isolation cabinet/Lightning protection device/Bypass stablelized
cabinet/ Customized appearance and size | |||||
| Model Number | 50KVA | 60KVA | 80KVA | 100KVA | |
| Rating capacity | 40 KW | 48 KW | 64 KW | 80 KW | |
| Rating voltage | 220VAC Single Phase (6-20KVA) / 380VAC Three Phases | ||||
| AC input | |||||
| Voltage range | ±25% | ||||
| Frequency range | 50/60Hz±10% | ||||
| Soft start | 0 – 100% 5 seconds | ||||
| Power Factor | 0.95(with input filter) | ||||
| Bypass input | |||||
| Permitted voltage range | ±15% | ||||
| Frequency range | 50/60Hz±5% | ||||
| Output | |||||
| Voltage accuracy | 220V±1%(steady load) 220V±3%( fluctuating load) | ||||
| Permitted Frequency range | 50/60Hz±0.05Hz(powered by battery) | ||||
| Power factor | 0.8 | ||||
| Waveform Distorition | Linearload<2%, non linear load<4% | ||||
| Dynamic load voltage transients | <5% | ||||
| Crest factor(lpeak/ lrms) | 3:01 | ||||
| Overload capacity | Normal in 110% load, 125% for 10min | ||||
| Efficiency | Double conversion mode: 94%; ECO mode: 98% | ||||
| DC | |||||
| Battery voltage | 220V; (10-40KVA 110V is optional) | ||||
| Cutoff voltage | 185V | ||||
| Maximum discharge current | 181A | 218A | 291A | 364A | |
| Panel display | |||||
| LCD | Chinese/English UPS status, operation instruction input voltage,
output voltage, current, frequency, battery voltage, value of
charge and discharge current, fault display , warning | ||||
| Environment | |||||
| Temperature | 0ºC-40 ºC | ||||
| Humidity | 0-95%(no condensing) | ||||
| Storage temperature | -25 ºC—55 ºC | ||||
| Altitude | <1500m | ||||
| Physical features | |||||
| Weight(KG) | Net | 580 | 650 | 900 | 950 |
| Gross | 600 | 675 | 925 | 988 | |
| Dimesion W X D X H mm | 800×800×2260 | 800×1200×2260 | |||
| Optional | RS485/SNMP/ Harmonic compensation cabinet/Input and output
isolation cabinet/Lightning protection device/Bypass stablelized
cabinet/ Customized appearance and size | ||||
