Active Member
|
[China]
Address: 4F block A,Building 1, Senyang High Technology Park, Guangming New District, Shenzhen, China.
Contact name:Phyllis
Shangyu (Shenzhen) Technology Co. Ltd |
|
|
Technical Data for 1kva to 3kva( "B" means built-in battery and "H" means extenal battery)
| Model | HP1101B | HP1101H | HP1102B | HP1102H | HP1103B | HP1103H |
| rated power | 1KVA/800W | 2KVA/1600W | 3KVA/2400W | |||
| Input and output modes | Single phase in single phase out | |||||
| Electrical Characteristics | ||||||
| Product topology | On-line double conversion IGBT with micro-controller | |||||
| Input voltage | 220/230/240V | |||||
| Input voltage range | 122-300V Full power operation | |||||
| Output Voltage / Output Distortion | 220V/230V/240V ±1 %, THDU<3% | |||||
| frequency range | 50/60Hz, auto-detection | |||||
| effectiveness | Up to 90%(Online) | |||||
| Overload capacity | 105%-125% : 1min, 125%-150% : 30s; 150%-200% : >300ms. | |||||
| Power factor | 0.98 | |||||
| Conversion time | Zero millisecond conversion | |||||
| Battery voltage | 24VDC | 36VDC | 48VDC | 72VDC | 72VDC | 96VDC |
| Charging current | 1A | 6A | 1A | 7A | 1A | 7A |
| Battery type | Valve regulated lead-acid battery | |||||
| Standby time/min | 〉7/14 | / | 〉11/31 | / | 〉5/16 | / |
| (Full load / half load) | ||||||
| Communication | ||||||
| Communication port | RS232 | |||||
| Scalable slots | 1 pcs (Suitable for SNMP cards, ModBus-RTU cards, dry contact cards) | |||||
| Operating environment, technical specifications and standards | ||||||
| Operating environment temperature and humidity | 0 to 40°C / 20%~90% non-condensing | |||||
| Noise | <55dB | |||||
| Safety | IEC/EN 62040-1 | |||||
| EMC | IEC/EN 62040-2 | |||||
| Certification | TLC / radio certification / energy-saving certification | |||||
| Physical parameters | ||||||
| W | 146 | 146 | 193 | 193 | 193 | 193 |
| L | 515 | 530 | 327 | 327 | 327 | 327 |
| H | 608 | 455 | 400 | 400 | 400 | 400 |
| Weight(kg) | 10 | 6 | 18 | 9 | 24 | 9.5 |
Technical data for 6kva to 10kva:
| Model*1 | HP1106B | HP1106H | HP1110B | HP1110H |
| rated power | 6KVA/5.4KW | 10KVA/9KW | ||
| Input and output modes | Single phase in single phase out | |||
| Electrical Characteristics | ||||
| Product topology | On-line double conversion | |||
| Input voltage | 220/230/240V | |||
| Input voltage range | 120-275V,176-270V Full power operation | |||
| Output Voltage / Output Distortion | 220V/230V/240V ±1 %, THDU<3% | |||
| Enter the frequency range | 45Hz-64Hz, 50/60Hz Adaptive | |||
| effectiveness | Up to 90%(Online) | |||
| Short circuit current | 82A | 137A | ||
| Overload capacity | 105%-125% : 1min, 125%-150% : 30sec. | |||
| And machine | Maximum in parallel machine 3 sets(Optional) | |||
| Power factor | 0.9 | |||
| Conversion time | Zero millisecond conversion | |||
| Battery voltage*2 | 192VDC(Optional 204VDC/216VDC/228VDC/240VDC) | |||
| Charging current *3 | 4A | 8A | 4A | 8A |
| Battery type | Valve regulated lead-acid battery | |||
| Standby time/min | 〉6/18 | / | 〉4/11 | / |
| (Full load / half load) | ||||
| Communication | ||||
| Communication port*4 | RS232 | |||
| Scalable slots | 1 pcs (Suitable for SNMP cards, ModBus-RTU cards, dry contact cards) | |||
| Operating environment, technical specifications and standards | ||||
| Operating environment temperature and humidity | 0 to 40°C / 20%~90% | |||
| Noise | <55dB | |||
| Safety | IEC/EN 62040-1 | |||
| EMC | IEC/EN 62040-2 | |||
| Certification | TLC / radio certification / energy-saving certification | |||
| Physical parameters | ||||
| W | 250 | 245 | 250 | 245 |
| L | 515 | 530 | 515 | 530 |
| H | 608 | 455 | 608 | 455 |
| Weight(kg) | 57 | 17.5 | 65 | 20 |
