|
[China]
Trade Verify
Address: No. 799, Middle Jiasong Road, Qingpu District, Shanghai, China.
Contact name:Aaron.Zhang
Upass Material Technology (Shanghai) Co.,Ltd. |
|
Verified Suppliers
|
|
|
Black Color Used As Base Material High Density Polyethylene Film
Product Description:
HDPE Films made of HDPE granules are noted for their characteristic rustle and milky colouring and they are odourless. By adding colour concentrates a lot of colour variants can be achieved and by means of additives
films with the desired properties can be produced. Unlike LDPE films, their structure is duller,
their strength is higher, they are hazier, and they are not shrinkable. The thermal endurance
of HDPE films is from −50 °C up to +110 °C. Under everyday conditions of use HDPE films
are resistant to most chemical substances, they do not cause corrosion of the products
packed in them, and they can be welded. They have minimum permeability of water vapours
and smells, and they transmit oxygen, fats, and aromatic substances in a very limited amount.
Generally, HDPE films are more chemically resistant, which is given
by their structure.
In the natural variant, HDPE films are suitable for direct contact
with foodstuffs, the colour
variants only if the pigment content is within the concentration defined by the producer.
HDPE films are environmentally unobjectionable and recyclable, and they can be disposed
of in landfill or by combustion in which no substances harmful to the environment are released.
Phameter:
| Products Name | HDPE film | Spec. | 0.15mm*970mm | ||
| Detection Methed | Q/TPXP 1-2013 | Date | 2020.9.23 | ||
| NO. | Item | Factory Requirement | Detection Value | Detection | |
| 1 | Appearance | No bubbles, no stains, no damage, no impurities | Qualified | Qualified | |
| 2 | Spec. | Width | 970±10mm | 972 | Qualified |
| Thickness | 0.15±0.005mm | 0.153 | Qualified | ||
| 3 | Max.F (N/50mm) | TD (CD) | ≥150 | 192 | Qualified |
| MD | ≥150 | 238 | Qualified | ||
| 4 | Elongation (%) | TD (CD) | ≥200 | 1155 | Qualified |
| MD | ≥200 | 967 | Qualified | ||
| 5 | Tensile Strength | TD (CD) | ≥18 | 25 | Qualified |
| MD | ≥22 | 31 | Qualified | ||
| Detection | Qualified | ||||
Application:
| ► waterproofing membranes |
| ► packaging of a wide range of products |
| ► separating layer of bitumen boards |
| ► carriers of release liner |
| ► films for the manufacture of boil-in bags |
| ► semi-products for the manufacture of bags, T-shirt bags, and sheets |
| ► semi-product for the manufacture of advertising carrier bags |
| ► semi-product for printing |
Surface material for waterproofing membarnes
Base film for waterproof membranes
Exhibitions:
