Shenzhen BOWShine Technology Co., Limited |
|
for Citron for Peugeot Lexia 3 V 48 PP2000 full chip
Features:
1. Firmware Serial Reference Number: 921815C
2. Diagbox version: V7.83
3. Password: scary01
4. Supported Languages:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch,
Polish, Italian, Hungary, Greek, Czech.
5. Update: By CD or Link.
6. It works for Citroen and for Peugeot.
Notice :
PP2000 and lexia softare only be installed in XP system 32 bit,
Diagbox software only be installed in win 7 system 32 bit.
Pls don't install lexia and pp2000 software together with diagbox software in one PC.
diagbox software has included pp2000 and lexia software, Diagbox need be installed in one laptop individually.
When installing software, pls close anti-virus software and firewall. otherwise anti-virus software and firewall will destroy software and your pc system .
For Ci-troen :
C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/ C-ELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/
C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/
BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-
TRIOMPHE/ C-QUATRE
For P-eugeot:
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/
1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/
406/ 605/ 806
PP2000/LEXIA-3 Interface latest version, works for both C-itreon and P-eugeot
Dealer diagnostic scanner for comprehensive for Cit-roen and for P-eugeot cars diagnostic. You can
do all as a authorized dealer does.This diagnostics software allows you to perform complete
diagnostics of all from 1995 on.Diagnostics is performed via OBD-II connector (which is located
near steering wheel) or via manufacturer-specific connector(only older cars, pre-2001).
Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs
nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains
K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version,
manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too
low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant
Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all
measured values). Logging to file is also supported,which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel,
lock/unlock doors, cut off fuel, etc..)
7.Programming Functions/Adaption
This feature is of great importance in all vehicles because systems like Engine control units,
Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform
reset or programming procedures after car repair is done, or even configuration after replacing
broken
8.Control Unit
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD
space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with
the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Specifications for S1279 Interface Module
Diagnostic module of Nemo,Boxer III,Jumper III.
S.1279 module of PPS2000 Lexia-3 Citroen Peugeot( Nemo,Bipper,Boxer
III,Jumper
Diagnostic module of Nemo,Boxer III,Jumper III.
S.1279 module of PPS2000 Lexia-3 Citroen Peugeot( Nemo,Bipper,Boxer
III,Jumper III)
connected between lexia3 interface and new cars .
only that module can do it!!
Package List:
1* Main unit
1* OBD-2 cable
1* USB cable(2 pcs)
1* Software CD
1* S1279 Interface Module
1* Lexia3 30pin Cable
Lexia3 Full Chip
S.1279 Interface Module
Lexia3 30pin Cable