Active Member
|
[China]
Address: BLOCK B 4TH FLOOR BUILDING B HAOYE LOGISTICS ZONE SHUGANG TONGDAO XIXIANG JIEDAO BAO AN DISTRICT SHENZHEN CHINA 518126
Contact name:Shian
Shenzhen Pride Instrument Inc. |
|
|
QF/QR Series Quick Hot Forging Test Machine
This kind of machine is designed according to the International standards “Metallic materials forging test methods”, especially for the quality inspection of high-speed rods and wires. Through simulating the quick impact conditions of the metallic materials during the forging and pressing, the machine truthfully reflects the instances of the quickly compressed rods and wires.
Main Features: This kind of machine can quickly, high efficiently, and wholly simulating the conditions of the metal rods and wires in the course of forging and pressing, and then gets the test result. It integrates the shearing, alignment, and quick forging, with compact structure and beautiful outline. This machine is easily operated, and the operator can get the test result within two minutes. The test is quick and completed, with high efficiency. Through actual triple shift continues use, it shows that the machine has such features as low fault ratio and high reliability. It can content the quality inspection requirements of high-speed rod and wire product lines.
Applications: This kind of machine is widely used in the steel industry, standard samples manufacturing industry, and tools manufacturing industry, for the inspection of the metallic materials forging tests. Under the room temperature or the hot conditions, exert test force on the direction of specimen axial line, quickly compress the specimen, and then inspect the metal ability of bearing forging deformation in the specified forging ratio. It also can show the metal surface disfigurements.
Technical parameters
| Model | QF-1000 | QF-2000 | QF-3000 | QF-5000 |
| QR-1000 | QR-2000 | QR-3000 | QR-5000 | |
| Max. forging force (kN) | 1000 | 2000 | 3000 | 5000 |
| Max. shearing force (kN) | 1000 | 1000 | / | / |
| Max. alignment force (kN) | 150 | 150 | / | / |
| Cold forging speed (mm/s) | 30 | 50 | 60 | 70 |
| Hot forging speed (mm/s) | 50 | 70 | 90 | 100 |
| Forging time (s) | 0.5 | 0.5 | 0.5 | 0.5 |
| Specs for shearing (mm) | 5-20 | 5-25 | / | / |
| Specs for cold forging (mm) | 5-20 | 5-25 | 5-40 | 5-50 |
| Specs for hot forging (mm) | 5-35 | 20-60 | 20-90 | 20-110 |
| Cold forging ratio | 1/2,1/3 | 1/2,1/3 | 1/2,1/3 | 1/2,1/3 |
| Hot forging ratio | 1/3 | 1/3 | 1/3 | 1/3 |
| Safety equipment | Protection for over-loading and stroke limit etc, good scrutiny | |||
| Dimensions of load frame (mm) | 1800*570*1600 | 1930*570*1900 | 690*690*1905 | 965*965*2220 |
| Dimensions of bump house (mm) | 800*800*1020 | 800*800*1020 | 1590*1000 *1040 | 1590*1000 *1040 |
| Dimensions of working platform | / | / | 560*550*950 | 560*550*950 |
| Power supply | AC 380V, three-phases four-wire system | |||
| Gross Power (kW) | 3.5/6 | 4/6 | 8 | 9 |
| Weight (kg) | 2500 | 3800 | 4500 | 5000 |
Note: 1.In general, the cold forging and hot forging are incompatible. If the customer requires the cold and hot forging tests completed on one machine, it is needed to declare the requirements when ordering the machine.
2.The max. forging force is decided by the specimen diameter, the material strength, and the forging ratio.Please inquire the manufacture for choosing the proper model, and we can also produce the machine according to the customer’s requirement.
3. If a special forging ratio is required, the machine can be made according to the customer’s requirement.
4. Quick hot forging test machines have different heating methods, such as chamber furnace, median frequency, and power frequency. Please contact the manufacturer for choosing specific heating method.
5.The standard test machines of model QF-3000, QR-3000, QF-5000, QR-5000 have no shearing and alignment work positions.
