Active Member
|
[China]
Address: No. 15th Road Keji 7th,Xi'an Hi-tech Zone , Xi'an Shaanxi
Contact name:Mandy
Shaanxi Xi an Unique-technology Co.,Ltd |
|
|
(Armorcast Sheath Repair and Structural Strengthening Material)
unique-technology cable armor tape is a flexible fiberglass knit fabric strip, saturated with a curable polyurethane resin syrup that starts to cure after adding water. once wetted, the fiber strip becomes tacky and sticks to itself, so it wraps easily around almost any shape or size.
it’s applied to reinforth shield and connector of cable.mostly use
in aerial, buried and manhole applications and is ideal for
strengthening old cables, splices and auxiliary seals.
it resists moisture, acids, alkalis, ozone, gasoline and high
temperatures.
Technical Data Sheet
| Color: | Black / White | ||||||
| Application Method: | Wet Lay-up | ||||||
| Melting point: | 680℃ | ||||||
| Boiling point: | >1000℃ | ||||||
| Operation time: | 3~10 minuets (depend on operation temperature) | ||||||
| Cured time: | around 30 minuets after direct exposure to water | ||||||
| Heat Resistance: | 0 ℃ ~ 150 ℃ | ||||||
| Hardness,Shore D: | 70 | ||||||
| Warp / Weft Density: | 12 roots/cm | ||||||
| Thickness: | Single Ply: 30mm ± 0.5mm ( 10 Mils ± 2 Mils ) | ||||||
| Fabric Weight: | 420 g/m 2 | ||||||
| Resin Content: | 45% ± 3% | ||||||
| UV Resistance: | UV inhibitors added | ||||||
| Toxicity: | Non-Toxic. Non-Hazardous. | ||||||
| Shelf Life: | 3 years from production date |
Unique-Technology Cable Armor Tape Application
1. Prepare the surface by cleaning and roughening the cable.
2. Put on enclosed latex gloves.
3. Open foil pouch and immerse bandage in temperate fresh water for
10 seconds.
The entire contents must be used once the package is opened.
4. Apply around the cable extending up to 50mm either side of the
cable to ensure complete coverage. It is important that the bandage
is applied.
5. Quickly as curing begins once it is taken out of the water.
6. Whilst wrapping, pull each layer tightly by using your hand to
mould and squeeze the layers together.
Continue this action during and upon completion.
Specification&Offer
(The length can be produced as required. )
(The width can be 5cm/7.5cm/10cm/12.5cm/15cm)
| Itmes | Size | Packing | Remark |
| UT2-1.5 | 5cmX1.5m | 10rolls x 10rolls/ctn | |
| UT4-3 | 10cmX3m | 10rolls x 10rolls/ctn | |
| UT4-4.6 | 10cmX4.6m | 10rolls x 10rolls/ctn | Normal size |
| UT6-3.6 | 15cmX3.6m | 8rolls x 10rolls/ctn |
Features:
1. Using wet type of rubber with high resistance to sunlight as the
backing material net cloth backing, easy to use, wrap on the cable
accessories or electric cable directly outside protective layer to
form a high strength, can strengthen the mechanical protection of
connectors and cables.
2. Once wet, the fiber strip becomes tacky and sticks to itself
3. Compatible with coaxial, copper, fiber cables, polyethylene or lead-sheathed cable, pressurized and non-pressurized cable
4. Ideal for strengthening old cables, splices and auxiliary seals
5. Fast and easy to apply, yet hardens to a strong and maintenance-free coating
6. Resists moisture, acids, alkalis, ozone, gasoline and high
temperatures.
7. Can be used on pressurized or nonpressurized cable and on either
polyethylene or leadsheathed cable
