|
[China]
Trade Verify
Address: North 5th floor, West technology park, West Wenyi Road, Zhongxin Road, Yuhang city, Zhejiang Province, China
Contact name:Hogo Lv
Hangzhou Altrasonic Technology Co., Ltd |
|
Verified Suppliers
|
|
|
100W 40Khz Ultrasonic Cutting Machine For Cutting Golf Ball Easily
Description:
Ultrasonic Cutting Machine is a class of device using ultrasonic
energy for cutting. Instead of using traditional blade
cutting,ultrasonic cutting has its advantages of smooth, reliable
cutting, accurate trimming, no deformation, no raising, fuzzing,
spinning,wrinkling etc. It can avoid the rough cutting-edge, coked
edge, fuzzballs and other shortcomings of laser cutting machine.
Ultrasonic cutting machine is used for cutting rubber, synthetic
fabric, cloth, plastic, sheet metal, food etc.
The cutting of food products using ultrasound is performed when an
ultrasonic blade comes into contact with the product to be cut,the
high vibration of 40,000 pulses per second, makes this product very
easily be cut even if it is of delicate or sticky texture
composition.
The much higher vibration does not allow any product to stick to
the blade. The cut is clean and without pressure on the product.
Specification:
| Model | HS-C40 |
| Frequency | 40KHZ |
| Output Power | 100W |
| Generator | Analog generator, 155 x 265 x 170mm |
| Handle | Φ32×170 |
| Size of cutter | Blade replaceable |
| Length of cable | 3M |
| Outer skin | Aluminum |
| Weight | 8KG |
| Voltage | 220V / 110V |
| Accessory | Foot switch1pc；Cut blade 25pcs；1.5mm special hex wrench 1pc； Screw M3×4L 2pcs |
| Material of cutter | titanium alloy, stainless steel |
The difference between traditional cutting and ultrasonic cutting
Ultrasonic cutting machine is the use of wave energy for cutting
equipment, the main t feature is not to use the traditional edge.
The traditional cutting utilizes a tool with a sharp edge to press
the cutting material. The pressure is concentrated at the edge of
the blade, the pressure is very large, more than the shear strength
of the cutting material , then the material is cut open. As the
material is cut by a strong pressure, so the cutting tool edge
should be very sharp and the material itself has to bear the
relatively large pressure. Therefore the cutting effect for the
soft, flexible material is not good, especially more difficult for
sticky material.
Competitive Advantage
♦ Environment-friendly (No noise, no smoke, no air contamination)
♦ Smooth cutting of difficult-to-cut materials
♦ Small hand-held size(can be attached to automotive machinery arms)
♦ No special installation equipment
♦ The use of high power ultrasonic transducer vibrating element, ensure the long time stable working
♦ The cutting speed is improved greatly, the efficiency 10 times higher than the traditional cutting knife.
♦ Cutting all kinds of ordinary tool to cut products, solve production problems
♦ Can be installed high hardness blade, cutting blade can be replaced, greatly reducing the use cost
♦ Cutting tool complete varieties, can also be customized according to customer process shaped cutting tool
♦ Installation, easy to use, almost does not change the original cutting process
♦ Can be used in the production of circular ultrasonic tool cutting equipment, rolling cutting, suitable for cutting special
♦ Can use air-cooling, water-cooling design, adapt to various working conditions and environment
Typical materials processed
The following table presents the company tests for different material thickness, the recommended cutting speed data.
| Cutting Material | Thickness | Cutting speed |
| ABS/PE | 2mm | 4mm/s |
| 3mm | 2mm/s | |
| 4mm | 1mm/s | |
| PVC | 2mm | 15mm/s |
| Asian gram force | 2mm | 3mm/s |
| Non-woven fabric | 3mm | 2mm/s |
| Chloroprene rubber | 5mm | Easy to cut |
| Corrugated paper | 8mm | Easy to cut |
| Plywood | 2.5mm | Easy to cut |
| Glass fiber resin | 1.5mm | Easy to cut |
| Thick cardboard | 1.5mm | Easy to cut |
| Linen | 2mm | Easy to cut |
| Urethane | 3mm | Easy to cut |
| Nylon/PP | 3mm | Easy to cut |
Why choose us?
1.Oversea Service Team: We now have agents in India,Austrillia,Hongkong,Singapore,Taiwan,Malaysia,Germany,and other country still being discussing.
2.Innovation: Altrasonic R&D and marketing staffs to constantly explore new applications in the field of ultrasound, and the importance of team spirit of cooperation.
3.Half the Price, Double the value: Every product reach you have been test in our company three times,and with 72 hours continous working,to confirm it is well before you get it.
4.Good Components: Ceramic mainly importes from German,and using the superior quality aluminum,titanium raw materials.
5.Individual Customize: We can customize products according to your requirements.Also supply OEM service.
6.Free Test: We accept samples from customers,do free test for customer. Also welcome customer visit our company for experiment.
Shipping and payment:
Shipping: DHL,TNT,FEDEX,UPS Express etc.
Payment: Pay by T/T,Paypal,West Union, customers can choose which payments ways that you accept.
