Robotic Ultrasonic Cutting Knife For Precise And Smooth Deburring And Trimming

Robotic Ultrasonic Cutting Knife For Precise and Smooth Deburring and Trimming in Multiple Industrial Applications

Description: 

obotic ultrasonic cutting Robotic ultrasonic cutting is a new technology with enormous potential to replace more traditional cutting processes. Ultrasonic cutting is already being implemented in a wide variety of applications all over the world.The high speed and low cutting forces make ultrasonic cutting ideal for non-metallic materials including plastics, foam, carpet, rubber, fiberglass-reinforced plastic and non-woven material.

Specification:

Advantages:

Robotic ultrasonic cutting is great for many different applications and provides numerous benefits over more traditional cutting methods.

Ultrasonic cutting technology is quite different from other cutting techniques. Because of this, it has found widespread use in the industrial sector and will likely continue to grow in popularity due to the many benefits it provides.

Process flexibility

Enhanced precision

Cleaner cuts

Reduced operating costs

Energy efficient

Improved worker safety

Clean and Eco-Friendly

Eliminates swarf, noise, burnt edges, flue gases or moisture penetration

No water waste disposal

Small footprint

Applications:

Low pressure mold trimming

Non-woven carpet/fabric cutting

Instrument panel kiss cutting

Molded plastic part flash trimming and edge chamfering

Automotive interior components such as door trim, steering wheels, instrument panels, consoles and HVAC molded components

Most all injected, vacuum, rotational or blow molded parts for general industry usage

FAQ

1.  How does the ultrasonic cutter work?

The ultrasonic cutter is composed of a "transducer" that generates vibration and an "oscillator" that drives the transducer. A piezoelectric element is used for the transducer. When voltage is applied, the piezoelectric element displaces the transducer by a few micrometers. Periodically applying voltage generates vibration. Each object has its special frequency, by which the object is stable and easy to vibrate. By adding an external force that corresponds to that special frequency, a small force can obtain a large vibration. This phenomenon is called resonance. In the ultrasonic cutter, the piezoelectric element generates a force that resonates the whole body, from the transducer to the blade tip, generating a large vibration at the tip. The oscillator periodically generates voltage to resonate and drive the transducer. Using a component of the ultrasonic cutter called the horn to wring the cross-sectional area, from the piezoelectric element to the blade tip, can obtain a larger vibration.

2. Manufacturing examples:

The HSPC30 is designed to be built into apparatuses, such as robots and automated machines, as a cutting tool for cutting and deburring.
ON/OFF operation and amplitude change can be performed from the outside. The HSPC30 can output error signals, such as overload notifications. (Specifications vary according to the model.)

It can be used to:

+ Cut vehicle interior materials
+ Cut carbon fiber prepreg for aircrafts
+ Debur and gate-cut resin-molded products

+ Half-cut multilayer materials

    It can also be used easily as a hand tool

Other examples of how the HSPC30 can be used:

+ To clean fossils
+ To cut breads
+ To cut geological sections (clay layers)
+ To remove rust, paint, and extraneous matter
+ To edge process film materials
(rounding of angular parts)