Ultrasonic Hand-held Cutter with Blades Replaceable for Cutting
Thermoplastic and Fabric
Specification:
Model | HS-C40 |
Frequency | 40KHZ |
Output Power | 100W |
Generator | Analog generator, 155 x 265 x 170mm |
Handle | Φ32×170 |
Size of cutter | Blade replaceable |
Length of cable | 3M |
Outer skin | Aluminum |
Weight | 8KG |
Voltage | 220V / 110V |
Accessory | Foot switch1pc; Cut blade 25pcs; 1.5mm special hex wrench 1pc; Screw M3×4L 2pcs |
Material of cutter | Magnalium alloy, titanium alloy, stainless steel |
Description:
Ultrasonic Cutting Machine is a class of device using ultrasonic
energy for cutting. Instead of using traditional blade cutting,
ultrasonic cutting has its advantages of smooth, reliable cutting,
accurate trimming, no deformation, no raising, fuzzing, spinning,
wrinkling etc. It can avoid the rough cutting-edge, coked edge,
fuzzballs and other shortcomings of laser cutting machine.
Application:
- Aramid Prepreg
- Boron Prepreg
- Carbon Phenolic Prepreg
- Fiberglass Prepreg
- Graphite Prepreg
- Hybrid Prepreg
- Thermoplastic Prepreg
- Unidirectional Tape
- Aluminum Core Cured/Uncured Rubber
- Foam Core Sealant
- Nomex Core
- Phenolic Core
- Woven Fabric
- Braided Materials
Competitive Advantages:
★ Cutting all kinds of ordinary tool to cut products, solve
production problems
★ Installation, easy to use, almost does not change the original
cutting process
★ Can use air-cooled, water-cooled design, adapt to various working
conditions and environment
★ Can be installed high hardness blade, cutting blade can be
replaced, greatly reducing the use cost
★ The cutting speed is improved greatly, the efficiency 10 times
higher than the traditional cutting knife.
★ Cutting tool complete varieties, can also be customized according
to customer process shaped cutting
★ The use of high power ultrasonic transducer vibrating element,
ensure the long time stable working tool
★ Can be used in the production of circular ultrasonic tool cutting
equipment, rolling cutting, suitable forcutting special
Problem and solution:
Item | Problem | Cause description | Solution |
| Power switch to “I” the light is out | Power plug loose | Plugging in |
Power line break | Fix it yourself or send back |
Power switch bad contact |
Fuse is broken |
Power light and running light are OK | Air plug and socket not connected | Tighten the connection position |
Handle have abnormal Sound | Clean the card slot, use new blade |
Intermittently use, but the handle keeping hot | Please send it back |
Out-put air plug break |
Screw loose | Tighten the screw |
Running light is ok | Running switch bad | Please send it back |
Product display