Titanium Ultrasonic Air Horn Bumper Welding Ultrasonic Cutting Horn

Ultrasonic horn for ultrasonic bumper welding with titanium horn

The welding of Bumper elements mostly done with ultrasonic in the form of staking, spot welding. In some case heat sealing or Hot air Sealing is also applicable. Another special application is Ultrasonic cutting to make a clean and sharp openings on P.P. Bumpers. In case of burrs (residues of injection runner) appeared, It is also required to cut and trim with ultrasonic ( Knife ) accordingly.
In case of reinforcement required ( at the back side of Bumper), A hot plate welding system or vibration welding system shall be applied.

Every part of the car requires ultrasonic welding. RPS-SONIC can provide you with the corresponding electric box and transducer (transducer, horn & tool head). Provide reasonable suggestions based on your installation space and welding application, including the size of the tool head, the power model of the electrical box & transducer We have professional transducer & tool head production and design capabilities. Can provide you with suitable ultrasonic electric vibration system according to different application conditions

Parameter:

Why RPS-SONIC HORN:

1. Every horn will be designed by FEA system , so that to confirm the End face of the ultrasonic horn with uniform force

2. All ultrasonic horns with three months warranty.

3. Specialized in high power ultrasonic for more than ten years

4. Every ultrasonic horn with 24hours old testing before shipment.

5. Good packing, no packing problem during the 10 years exporting business.

6. Every customer will get purchase records and there are certain rewards after accumulation

Service and shipment

• Warranty one year for transducer.
• You can contact us for technical inquiry any time.
• We supply OEM service for oversea customer, also will keep Confidentiality for our customers.
• We supply customized products service for small quantity also.
• Shipment by FED-EX /DHL/UPS/TNT

Applicable materials

Ultrasonic welding is a fast, strong, clean, and reliable plastic and metal joining process. For thermoplastic films and boards, most metals can be ultrasonically welded. Applicable plastic

Ultrasonic plastic welding can be used on all thermoplastics. Care must be taken when slitting parts made of partially crystalline plastic, the welding used for this plastic type

The method is very different from the welding method of amorphous plastic.

PS, ABS, Acrylic, ABS, SAN, PMMA, PC-ABS Blends, Polycarbonate / PC, PC-ABS Blends, PPS,

Polysulfone / PSO, PVC, ASA, PPO, PC-PBT Blends, Polyester, Ryton, PET, Polyamide Co-polymer (Nylon6-3-TD), Valox Polyamide / Nylon 6, Polyamide / Nylon6 / 6, PBT, PP, PE , Polyacetal, Ultem (PEI)