Home Companies Hangzhou Powersonic Equipment Co., Ltd.

Medical Extraction Ultrasonic Liquid Processor Ultrasonic Sonochemistry

Hangzhou Powersonic Equipment Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Enbo Street 1028, Fuyang,Hangzhou ,ZheJiang

Contact name:Yvonne Han

Inquir Now

Hangzhou Powersonic Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Medical Extraction Ultrasonic Liquid Processor Ultrasonic Sonochemistry

Country/Region china
City & Province hangzhou zhejiang
InquireNow

Product Details

20khz 3000w ultrasonic sonochemistry water treatment for medical extraction

 

Parameter

 

ModelSONO20-1000SONO20-2000SONO15-3000SONO20-3000
Frequency20±0.5 KHz20±0.5 KHz15±0.5 KHz20±0.5 KHz
Power1000 W2000 W3000 W3000 W
Voltage220/110V220/110V220/110V220/110V
Temperature300 ℃300 ℃300 ℃300 ℃
Pressure35 MPa35 MPa35 MPa35 MPa
Intensity of sound20 W/cm²40 W/cm²60 W/cm²60 W/cm²
Max Capacity10 L/Min15 L/Min20 L/Min20 L/Min
Tip Head MaterialTitanium AlloyTitanium AlloyTitanium AlloyTitanium Alloy

 

Introduction:

Ultrasonic Sonochemistry is the cross-penetration of acoustics and physical chemistry, and it is also a branch of physical chemistry. Ultrasonic  can accelerate conventional chemical reactions, accelerate the decomposition and synthesis of substances in organic solvents, and strengthen chemical units (ultrasonic cleaning, ultrasonic extraction, ultrasonic crystallization, ultrasonic emulsification, ultrasonic flocculation, ultrasonic adsorption and ultrasonic membrane separation, etc.). These applications are called sonochemistry. Sonochemical technology is an emerging, multidisciplinary and fringe science developed in the 20th century.

The cavitation effect of ultrasonic energy Irradiate the solution with a certain sound intensity. When the sound intensity increases to 0.5 ~ 0.7 W / cm *, if you put a hydrophone in the solution, you can hear the strong noise in the solution. . This noise occurs with the phase of the sound field and occurs once in one or more cycles. It has been found that this noise essentially bends when the sound field is in the expanding phase, and the trace gas dissolved in the solution accumulates into small bubbles (also known as cavitation nuclei). After the sound field becomes a compression phase, the radius meets- Conditioned gas pools are rapidly compressed and inward condensation occurs. In this way, the liquid wall around the bubble produces a strong paddle sound when it shrinks rapidly. This process is usually extremely momentary and only occurs between a few nanoseconds and a few microseconds. For the gas in the bubble, the temperature rises sharply after being compressed. This temperature is usually astonishingly high, reaching a maximum of more than 10,000 degrees Celsius, and at a few thousand degrees when it is low. This physical process is called cavitation effect, and the accompanying noise is called cavitation noise. This temperature is related to the green strength, the initial radius of the bubble, the radius at which the compression ends, and the specific heat capacity of the gas. Therefore, as the dissolved gas in the solution is different, the temperature at which the cavitation region terminates after cavitation occurs is not the same, and the volume of the solution in which the rare gas is dissolved often has a higher cavitation termination temperature. The local high temperature in the solution caused by the cavitation effect is the determinant of the chemical reaction.

Cavitation effect and sonochemical reaction Because the temperature of the cavitation region is extremely quotient, this region is generally called a hot spot ", which is the local quotient temperature point in the solution. The high temperature of the hot spot causes the interface between bubbles and liquid to be several hundred nanometers thick In the city being poured, the liquid molecules are cracked into free radicals. Due to the rapid contraction of the liquid wall when cavitation occurs, these: free radicals are projected into the solution at high speed at the same time as these are generated, and these highly talkative free radicals will be mixed with ficus Free radical reactions of molecules in the liquid, which trigger a series of chemical reactions

 

Application:

• Cell disrupter (extraction of plant substances, disinfecting, enzyme deactivation)

• Therapeutic ultrasound, i.e. induction of thermolysis in tissues (cancer treatment)

• Decrease of reaction time and/or increase of yield

• Use of less forcing conditions e.g. lower reaction temperature

• Possible switching of reaction pathway

• Use of less or avoidance of phase transfer catalysts

• Degassing forces reactions with gaseous products

• Use of crude or technical reagents

• Activation of metals and solids

• Reduction of any induction period

• Enhancement of the reactivity of reagents or catalysts

• Generation of useful reactive species

 

 

Before ultrasonic treatment

After ultrasonic treatment

 

 

Hot Products

35Khz Ultrasonic Cutting and Sealing Machine for all fabrics Frequency 35Khz Frequency adjustment ...
ultrasonic food cutting equipment with clean and smooth cutting surfaces An ultrasonic food cutter ...
Ultrasonic fabric cutting and slitting on machines with round knives Ultrasonic slitting on machines ...
Ultrasonic slitting of fabric rolls for polyster and non-woven fabric Ultrasonic fabric slitting is ...
35khz ultrasonic Widemist Ultrasonic Atomizer Spray Nozzle for fuel Cell Manufacturing What is the ...
Vertical ultrasonic machining tool ultrasonically vibrating mill ccomponents Introduction: Item ...