|
[China]
Trade Verify
Address: #613A, LinJI Industrial Building ,No.53 of Shun Ren Road ,Lin He Industrial park, ShunYi District ,101300 Beijing ,China
Contact name:WEI
TMTeck Instrument Co., Ltd |
|
Verified Suppliers
|
|
|
TMHVS-1000MDT-XY Semi-automatic Micro Vickers Hardness Tester
Main Features:
The x-y axis automatic displacement platform is controlled by
built-in stepping motor, which is controlled by mouse click, with
high positioning accuracy, good repetition accuracy, fast moving
speed and high working efficiency.
The system can be used as a whole or alone, with high flexibility.
The software system can control the automatic loading platform to
program and move, and a variety of measurement modes can be
selected, especially suitable for the measurement of carburizing
and nitriding depth.
All data is saved permanently, and inspection report can be
generated automatically
Technical specification:
| Model | TMHVS-1000MDT-XY |
| Hardness tester | |
| Test force | 10gf (0.098N),25gf (0.245N),50gf (0.49N),100gf (0.98N), 200gf (1.96N),300gf (2.94N),500gf(4.9N),1kgf (9.8N) |
| Carried standard | GB/T4340,ASTM E92 |
| Min measurement unit | 0.01µm |
| Conversion scale | HRA,HRB,HRC,HRD,HRF,HV,HK,HBW,HR15N,HR30N,HR45N,HR15T,HR30T,HR45T |
| Hardness measurement range | 8~2900HV |
| Test force loading method | Automatic (loading ,dwell,unloading) |
| Objective, indenter conversion | Automatic |
| Objective | 10X |
| Objective magnification | 10X(testing),40X(testing )(20X optional) |
| Dwell time | 1~99s |
| Max height of specimen | 90mm |
| The distance from indenter center to the outer wall | 130mm |
| Data output | LCD display |
| Data storage | Data is saved in U disk as EXCEL format |
| Power supply | AC220V+5%,50-60Hz |
| Software | |
| Camera | 1,300,000 |
| Driving motor | Stepping motor |
| Automatic sample table movement | The speed of moving up the x-y axis can be flexibly changed by the software .Click any point in the interface through the mouse to automatically select a point, the start position of the line can be set and random move position set,by clicking the mouse to select the automatic x-y displacement table carrying table for 8 directions of arbitrary movement control, can adjust the speed, can automatically reset. |
| Dimension | 100 × 100mm |
| Max movement | In the X-Y direction 50 × 50mm |
| Min movement | 1mm |
| Movement speed | 1-10mm/sec,adjustable |
| Displacement repetition accuracy | In 4um |
| Mode setting | The software system can control the automatic loading platform for programming and moving: 1)Measurement mode(Random A) Use this mode to load and read an optional point 2) Horizontal (X direction), vertical (Y direction) load and read 3) Measurement mode(Line Set A) Use this mode to suppress and read the direction at an angle to the surface (Zigzag movement, that is, the polyline movement of the hardened layer depth measurement) 4)Measurement mode(Line Set B) Press and read at regular intervals using this mode 5)Trajectory coordinate movement and other mobile programming |
| Test procedure | After all loads, measure one by one, while loading and measuring |
| Identation measurement method | Automatic /Manual |
| Automatic measuring time | About 0.3sec/1 pc identation |
| Hardness calibration | Can be corrected according to the standard hardness block or length scale |
| Data output | The inspection report can be customized according to user
requirements |
Standard accessories:
| Item | Quantity | Item | Quantity |
| Weight axle | Weight | 6 | |
| DHV-1000-10X eyepiece | Micro hardness test block(high, medium) | Each 1 | |
| Desktop computer | Software | ||
| Two dimensional monolithic platform(JSNB-ETS-50R-2) | Controller (PMC100-2(28) | ||
| Thin Specimen Testing Table | Flat clamping testing table | ||
| Lever | Filament clamping testing table | ||
| U Disk | 1 | Regulating screw | 4 |
| Power cord | Touch pen | 1 | |
| Certificate, warranty card | Fuse (2A) | ||
| Manual |
