Active Member
|
[China]
Address: Room 102, No 2, Fllor, No 18 of Xinye Nan Street, Xiagang, Changan Town, Dongguan City, Guangdong Province
Contact name:Jiang
Dongguan Huiyue Technology Co., Ltd |
|
|
Automatic Zinc Alloy Pressure Die Casting Machine For Hot Chamber Machine
Machine Description:
1, This machine can make different size of metal accessories for zinc and lead materials.
2, This machine is hot chamber die casting machine.
3, This machine can make buckle, button, slider and so on.
Machine Advantages:
1 | Proportional control system applied in the hydraulic system, easy
to set up the parameters, and makes the system run quickly, and reliably. The injection system uses an independent accumulator. A fast-response throttle applied in injection and pressurization to increase acceleration greatly and decrease the switching speed between high-speed and boosting, which embodies the excellent injection performance of modern high-quality die casting machines |
2 | In the electric system, PLC components from Mistsubishi & Omron
Japan, and electric components from Schneider, France are used. A technician could set up all the parameters by just touching the touch screen. |
hot chamber die casting machine specification
| Item | Unit | RDH18 | RD38T | RD50T | RD88T | RD138T | |||
| Die Locking Force | KN | 180 | 380 | 500 | 880 | 1380 | |||
| Die Stroke | MM | 150 | 200 | 235 | 250 | 290 | |||
| Ejection Fore | KN | / | 34 | 52 | 52 | 110 | |||
| Ejection Stroke | MM | / | 40 | 60 | 60 | 85 | |||
| Die Thickness(Min~Max) | MM | 100-300 | 100-330 | 100-340 | 100-350 | 150-450 | |||
| Die Dimension | MM | 385×360 | 450×480 | 470×503 | 535×578 | 620×670 | |||
| Tie-bar Inner Spacing(V×H) | MM | 236×236 | 290×290 | 310×310 | 357×357 | 415×415 | |||
| Tie Bar Diameter | MM | 40 | 50 | 56 | 63 | 75 | |||
| Injection Port Position | MM | / | 0,-40 | 0,-50 | 0,-60 | 0,-80 | |||
| Injection Stroke | MM | 90 | 125 | 130 | 130 | 150 | |||
| Traverse Stroke | MM | 150 | 150 | 190 | 190 | 200 | |||
| Injection Fore | KN | 27 | 40 | 55 | 90 | 110 | |||
| Plunger Tip Diameter | MM | 35 | 40 | 45 | 50 | 55 | 50 | 60 | 65 |
| Specific Presure | Mpa | 28 | 32 | 25.4 | 26.9 | 22.2 | 34 | 38.9 | 33.1 |
| Shot weigh(Zn) | kg(Zn) | 464 | 0.78 | 0.98 | 1.26 | 1.53 | 1.26 | 2.1 | 2.46 |
| Hydraulic Pressure | Mpa | 7 | 10.5 | 10.5 | 10.5 | 14 | |||
| Electric Motor Capacity | KW | 5.5 | 7.5 | 7.5 | 11 | 15 | |||
| Volume of Crucible(Zn) | L/kg(Zn) | 20/150 | 50/325 | 55/360 | 55/360 | 55/360 | |||
| Volume of Oil | L | 180 | 200 | 200 | 240 | 300 | |||
| Machine Weight | TON | 1.5 | 3 | 3.4 | 3.6 | 6 | |||
| Over All Dimensions | m(L×W×H) | 2.5×1.2×1.7 | 3.47×1.3×1.7 | 3.95×1.38×1.9 | 3.95×1.38×1.9 | 4.51×1.51×2.3 | |||
| Item | Unit | RD160T | RD200T | RD300T | RD400T | ||||
| Die Locking Force | KN | 1600 | 2000 | 3000 | 4000 | ||||
| Die Stroke | MM | 340 | 390 | 460 | 550 | ||||
| Ejection Fore | KN | 110 | 110 | 150 | 180 | ||||
| Ejection Stroke | MM | 85 | 100 | 95 | 125 | ||||
| Die Thickness(Min~Max) | MM | 150-550 | 200-580 | 250-660 | 300-750 | ||||
| Die Dimension | MM | 670×670 | 760×760 | 870×870 | 1030×1030 | ||||
| Tie-bar Inner Spacing(V×H) | MM | 465×465 | 510×510 | 560×560 | 620×620 | ||||
| Tie Bar Diameter | MM | 80 | 90 | 110 | 130 | ||||
| Injection Port Position | MM | 0,-80 | 0,-100 | 0,-125 | 0,-125 | ||||
| Injection Stroke | MM | 150 | 175 | 200 | 230 | ||||
| Traverse Stroke | MM | 200 | 214 | 255 | 340 | ||||
| Injection Fore | KN | 110 | 130 | 158 | 182 | ||||
| Plunger Tip Diameter | MM | 60 | 65 | 70 | 75 | 70 | 75 | 70 | 80 |
| Specific Presure | Mpa | 38.9 | 33.1 | 34.6 | 30.1 | 41.1 | 35.8 | 48.3 | 37 |
| Shot weigh(Zn) | kg(Zn) | 2.1 | 2.46 | 3.33 | 3.83 | 3.81 | 4.37 | 4.4 | 5.7 |
| Hydraulic Pressure | Mpa | 14 | 14 | 14 | 14 | ||||
| Electric Motor Capacity | KW | 15 | 18.5 | 18.5 | 22 | ||||
| Volume of Crucible(Zn) | L/kg(Zn) | 55/360 | 110/720 | 110/720 | 200/1350 | ||||
| Volume of Oil | L | 300 | 400 | 600 | 800 | ||||
| Machine Weight | TON | 6.5 | 8.5 | 11 | 17.5 | ||||
| Over All Dimensions | m(L×W×H) | 4.8×1.51×2.3 | 5.6×1.7×2.4 | 5.6×1.7×2.4 | 7.4×1.9×2.55 | ||||
FAQ
Q1. What is the advantage about your company?
A1. Our company has professional team and professional production line.
Q2. Why should I choose your products?
A2. Our products are high quality and low price.
Q3. The logo and the color can be customized?
A3. Yes, we can custom.
Q4. Any other good service your company can provide?
A4. Yes,we can provide good after-sale and fast delivery.
Machine Photo:
Machine Robot:
Factory:
Machine can make product as follow:
Packing:
Thanks for visiting our information, if you are interested in our products, please do not hesitate to contact us! have a nice day~
