Active Member
|
[China]
Address: Room E506, YingChuangDongLi Park, 1# of ShangDi East Road, Haidian District, Beijing, China
Contact name:Lareina Lee
Mitech CO.,LTD. |
|
|
Mitech Digital Ultrasonic Flaw Detector MFD550B with data processing software
Instrument Standard Configuration
| No. | Item | Qty | Remarks | |
Standard config. | 1 | Main unit | 1 | with full digital TFT LCD Display |
| 2 | Straight Beam Probe | 1 | 4 MHz, Φ10 | |
| 3 | Angle Beam Probe | 1 | 4 MHz, 8 mm×9 mm, 60° | |
| 4 | Probe Cable | 1 | Q9-C5,or optional C9- C5 | |
| 5 | Battery Module | 1 | 8.8 amp hour (MB-02) | |
| 6 | Power Adapter | 1 | ||
| 7 | Supporting pillar | 1 | ||
| 8 | Attached files | 1 | ||
| 9 | Datapro Software | 1 | ||
| 10 | USB Cable | 1 | ||
| 11 | Power Cable | 1 | ||
| 12 | ABS Case | 1 | ||
| Optional config. | 1 | Protective Cover for Main Unit | ||
| 2 | Dual-crystal Straight Probe |
Operation Using the Power Supply Unit
Connect the instrument to the mains socket-outlet using the power supply unit. The plug receptacle is at the top left of the instrument. Push the plug of the power supply unit into the plug receptacle until it snaps into place with a clearly audible click. The PWR LED on the keypad of the instrument will light in green color if the connection is properly aligned.
Operation Using Batteries
Use a lithium-ion battery pack provided with the instrument for the battery operation.
The battery compartment is situated at the instrument back. The cover is fastened with 4 screws To insert the battery pack
Loosen the four screws of the battery cover.
Lift the cover off upward.
Insert the battery into the battery compartment.
Close the battery compartment and fasten the screws.
Turn on the instrument to make sure the battery is installed correctly and firmly.
Warranty:
The product is guaranteed for two year since purchased. Log www.mitech-ndt.com or follow our company official public platform to register for maintenance. Please fill the blanks as required, if the product is not registered for maintenance, it will follow the date of manufacturer.
When applying for maintenance, please visit our official website, www.mitech-ndt.com or official accounts, submit “online reporting to repair” sheet.
In accordance with the international relevant regulations, the following are not within the scope of free warranty,
Damage caused by man-made or improper keeping
Self-dismantle or non-special repair shop dismantle
Do not follow the requirement of service registration or warranty expired
Consumable parts.
Service Promise
lMITECH users have lifelong maintenance service
lFree maintenance, inspection, software upgrade and etc.
