Hangzhou Powersonic Equipment Co., Ltd. |
|
The automotive interior panel ultrasonic spot welder
It is used to connect parts made of different materials, to make
the connection between thermosetting plastics and hot-melt plastic
parts, or to connect plastic parts to metal; it is to use the
inherent plastic studs and ribs on the molded parts. The wing and
the vertical rib are correspondingly pressed through the pre-formed
hole on the stamped metal plate structure, and the protruding part
of the metal surface (the hot pile) is softened by the controlled
hot melt, and then the special metal forming rivet is pressed and
cooled to be reshaped. Clamping, using a specific shape of the
rivet head can realize the riveting of the plastic rivet column
(flush riveting), hemispherical riveting, arc-flanging riveting,
vertical rib rivet riveting, mechanical forging, hemming inlay
coating, etc. The material of the material is mechanically riveted
and assembled together. The joint is not easy to be embrittled,
beautiful, firm and sealed, so that the optimal design of the
structure can be realized, and the best combination of mechanical
properties of various materials can be fully utilized to greatly
improve The overall component performance, the overall structure is
impact resistant, thus achieving the perfect fit.
The use of this principle is: automotive interior parts welding
machine, trunk interior panel welding machine, automotive interior
panel riveting machine, car door panel hot-melt riveting machine,
car bumper welding machine
The automotive interior panel ultrasonic spot welding machine
welding advantages
The interior panel spot welding machine adopts the most advanced
plastic hot riveting technology. The special riveting head can
realize the flush riveting, hemispherical riveting, countersunk
riveting (head riveting), arc flange riveting and ribbing of the
plastic stud. Riveting, folding and inlaying, etc., make point
contact with the machined workpiece, optimize the design with a new
concept, rive the assembly of plastic parts with metal parts or
other non-weldable materials. The riveting surface has good finish
and fast forming speed. Not easy to crack, embrittlement,
beautiful, firm, reduce production process, reduce material
consumption, greatly improve product quality, reliability and
production efficiency, effectively extend service life, with
advanced technology, reasonable structure, no vibration, no noise ,
non-polluting, high processing quality, etc., widely used in
aerospace military, electronic appliances, instrumentation,
micro-switch valves, auto parts, household appliances, hardware and
other industries to produce and assemble, to ensure high
performance and low cost, even in In the extremely harsh natural
environment and severe vibration, it can still be used safely,
stably and reliably for a long time.
Widely used in the Automotive Industry, Electronic Industry, Medical Industry, Household Appliances, Woven Apparel, Office Supplies, Packaging Industry, and Toy Industry And So On. Such As Plastic Body Parts, Car Doors, Car Dashboard, Lights, Mirrors, Sun Visor, Interior Parts, Filters, Reflective Material, Reflective Spike, Bumper, Cable, Motorcycle Plastic Filter, Radiator , Tanks, Pallet Plates. Plastic Electronics: Prepaid Water Meters, Communications Equipment, Atheism Phone, Mobile Phone Accessories, Cell Phone Case, Battery Case, Charger, Maintenance Valve Regulated Lead-Acid Batteries, 3-Inch Floppy Disk, U Disk, SD Card, USB Connectors, Toys, Stationery: Folder, Album, Folding Boxes, PP Hollow Board, Pen Loops, Ink Cartridges, Toner Cartridges. Medical Daily: Watches, Kitchen Utensils, Oral Liquid Bottle, Drip Caps, Mobile Phone Accessories, Gold Soft Brush, Daily Necessities, Health Supplies, Children's Products, Air Mattresses, Clothes Hangers, Tool Holder, Coffee Pot, Cover And Civil Speaker Grille Metal Surface.
Consumer products, automotive components, medical devices and most all industries use ultrasonic plastic welding. Metal inserts may be secured in plastic and dissimilar materials can often be bonded with proper tooling design. ToolTex specializes in toepad welding applications and has worked on several automotive applications.
Precision
Even the simplest, timer based ultrasonic press is capable of
reasonable precision, and stepping up to energy based units, linear
encoded or servo driven presses greatly enhance highly repeatable
assembly with tolerances of less than one one-thousandth (0.001″)
of an inch.
Ideal for Fixing Of Fancy Articles and Fixing Of Parts on Revolving Chairs and Other Furniture Replacing Therein Screws. Ultrasonic Hand Gun is also manufactured by us. Give Better Bonding Strength. Minimize The Cost As Screws Are No More Needed Resulting In Regular/Daily Savings. Suitable And Practically Successful Model in Furniture Industry is: 20 KHz Frequency System.
Features:
Parameter:
Item | 20 | 28 | 35 | 40 |
Frequency | 20Khz | 28khz | 35khz | 40khz |
Power | 800w | 600w | 500w | 300w |
Horn tip diameter | 12mm | 10mm | 8mm | 8mm |
Horn material | Aluminum alloy&Steel & Titanium alloy | |||
Generator | Digital generator |
Areas of use:
Automotive industry
Prototype/trials work
Conveyor belt repair
Re-work for automation
Fabric repairs and joining
Blister packs
Vac forming- component retaining
Equipment is mobile